And also several fixed shunts on the same bus? Sorry for not putting those questions in the same email.
On Thu, Mar 21, 2019 at 4:13 PM Jubeyer Rahman <[email protected]> wrote: > How about several loads connected to the same bus? > > On Thu, Mar 21, 2019 at 9:12 AM Ray Zimmerman <[email protected]> wrote: > >> They are added together. >> >> Ray >> >> On Mar 20, 2019, at 9:58 PM, Jubeyer Rahman <[email protected]> wrote: >> >> One more question regarding this, if a particular bus simultaneously has >> fixed shunt and switched shunt, whose susceptance will appear on bus data >> section. >> >> My intuition says, out of fixed shunt and switched shunt data, the one >> which will be parsed later should replace the previously parsed one. Am I >> right? >> >> Regards, >> Jubeyer >> >> On Mon, Mar 11, 2019 at 9:46 AM Ray Zimmerman <[email protected]> wrote: >> >>> In the psse2mpc() function, MATPOWER only reads the initial switched >>> shunt admittance data (BINIT column) of the switched shunt data, which >>> appears to be zero for all switched shunts in your file. >>> >>> Ray >>> >>> >>> On Mar 9, 2019, at 12:13 PM, Jubeyer Rahman <[email protected]> wrote: >>> >>> Sorry, please ignore my previous question. >>> >>> Here, I am attaching a PSS-E raw file where it contains some susceptance >>> values for switched shunt data. As per your statement, matpower should be >>> able to parse those susceptance values and they should appear in the 'BUS' >>> data section, under the header 'Bs'. But I don't see it doing. Do you know >>> why this is happening? and how to make those susceptance data appear under >>> the 'Bs' header. >>> >>> Regards, >>> Jubeyer >>> >>> On Fri, Mar 1, 2019 at 10:06 AM Jubeyer Rahman <[email protected]> >>> wrote: >>> >>>> So, does matpower consider every shunt data as fixed or switchable? >>>> >>>> On Tue, Feb 26, 2019 at 7:00 PM Ray Zimmerman <[email protected]> wrote: >>>> >>>>> Currently, MATPOWER does not yet model switched shunts explicitly, so >>>>> they are combined with the fixed shunts at a bus when importing from PSS/E >>>>> RAW format. >>>>> >>>>> Ray >>>>> >>>>> >>>>> > On Feb 26, 2019, at 12:39 PM, Jubeyer Rahman <[email protected]> >>>>> wrote: >>>>> > >>>>> > Hi, >>>>> > >>>>> > Does anyone know where does switched shunt data go, after applying >>>>> psse2mpc function to a PSS-E Raw file? >>>>> > >>>>> > And how does matpower distinguishes between switched shunt and fixed >>>>> shunt data? >>>>> > >>>>> > Regards, >>>>> > Jubeyer >>>>> >>>>> >>>>> >>>>> <case_OD_1.raw> >>> >>> >>> >>
