As Leslaw said earlier, the this is a known bug. After configuring the ECD it 
should help to reboot the device because this will restart all of the scripts. 
I have a patch in the works for it but have yet to send it off to QA. 

G

VISIONAIRE-Reza Toghraee <[email protected]> wrote:

>Thanks Leslaw
>
> 
>
>I had a successful recording, and it processed properly and displayed in
>Engage.
>
> 
>
>Is there any way to reduce the ingest/digest time? It took around 45 minutes
>after completion of recording until it came to Engage.
>
> 
>
> 
>
> 
>
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Dr Leslaw
>Zieleznik
>Sent: Thursday, December 08, 2011 4:14 PM
>To: Matterhorn Users
>Subject: Re: [Matterhorn-users] MattherHorn 1.2 and Epiphan Capture
>Appliance Updates and Issues -- New User
>
> 
>
>Reza,
>
> 
>
>I am going quite high with the resolution because we are using the DVI
>equipment, so my setup is:
>
> 
>
>For DVI channel
>
> 
>
>
>Frame size:
>
>[1600 x 1024 \/]
>
>
>Key frame interval:
>
>5
>
>
>Limit frame rate:
>
>10
>
>
>Bitrate:
>
>4096 kbits
>
>
>but if you are using XVGA, then the bit rate can go down to 2048.
>
>
>
>And for Video channel:   
>
>
>Frame size:
>
>[640 x 480 \/]
>
>
>Key frame interval:
>
>1
>
>
>Limit frame rate:
>
>18
>
>
>Bitrate:
>
>4096 kbits
>
>
>
>
>
>Interval between VGA signals autoadjastments: 60 secs
>
> 
>
>The same, but with no offset and no gain.
>
> 
>
>Leslaw
>
>
>
>
>
> 
>
> 
>
> 
>
>On 8 Dec 2011, at 11:19, VISIONAIRE-Reza Toghraee wrote:
>
>
>
>
>
>Dear Dr Leslaw
>
> 
>
>How is your VGA/DVI configuration?
>
>I have connected a machine with 1024x768 resolution and here is my
>FrameGrabber settings:
>
> 
>
>Interval between VGA signals autoadjastments: 60 secs
>
>Offset: 30
>
>Gain: 185
>
> 
>
> 
>
> 
>
> 
>
>
>_______________________________________________
>Matterhorn-users mailing list
>[email protected]
>http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users

Reply via email to