On 11-12-08 10:04 AM, VISIONAIRE-Reza Toghraee wrote: > Thanks Greg > > Can you please also give me some shines about what are the LEDs on ECD and > the 2 buttons in front ?
I know blue is disk access, and I think red is device power. Yellow appears to be relatively unusued from what I've seen. I believe one button is a device reset, and the other triggers a retrain of the VGA parameters. I haven't had cause to use either of those buttons so I can't be entirely sure! G > Regards > Reza > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Greg > Logan > Sent: Thursday, December 08, 2011 7:59 PM > To: Matterhorn Users > Subject: Re: [Matterhorn-users] MattherHorn 1.2 and Epiphan Capture > Appliance Updates and Issues -- New User > > As Leslaw said earlier, the this is a known bug. After configuring the ECD > it should help to reboot the device because this will restart all of the > scripts. I have a patch in the works for it but have yet to send it off to > QA. > > G > > VISIONAIRE-Reza Toghraee <[email protected]> wrote: > >> Thanks Leslaw >> >> >> >> I had a successful recording, and it processed properly and displayed >> in Engage. >> >> >> >> Is there any way to reduce the ingest/digest time? It took around 45 >> minutes after completion of recording until it came to Engage. >> >> >> >> >> >> >> >> From: [email protected] >> [mailto:[email protected]] On Behalf Of Dr >> Leslaw Zieleznik >> Sent: Thursday, December 08, 2011 4:14 PM >> To: Matterhorn Users >> Subject: Re: [Matterhorn-users] MattherHorn 1.2 and Epiphan Capture >> Appliance Updates and Issues -- New User >> >> >> >> Reza, >> >> >> >> I am going quite high with the resolution because we are using the DVI >> equipment, so my setup is: >> >> >> >> For DVI channel >> >> >> >> >> Frame size: >> >> [1600 x 1024 \/] >> >> >> Key frame interval: >> >> 5 >> >> >> Limit frame rate: >> >> 10 >> >> >> Bitrate: >> >> 4096 kbits >> >> >> but if you are using XVGA, then the bit rate can go down to 2048. >> >> >> >> And for Video channel: >> >> >> Frame size: >> >> [640 x 480 \/] >> >> >> Key frame interval: >> >> 1 >> >> >> Limit frame rate: >> >> 18 >> >> >> Bitrate: >> >> 4096 kbits >> >> >> >> >> >> Interval between VGA signals autoadjastments: 60 secs >> >> >> >> The same, but with no offset and no gain. >> >> >> >> Leslaw >> >> >> >> >> >> >> >> >> >> >> >> On 8 Dec 2011, at 11:19, VISIONAIRE-Reza Toghraee wrote: >> >> >> >> >> >> Dear Dr Leslaw >> >> >> >> How is your VGA/DVI configuration? >> >> I have connected a machine with 1024x768 resolution and here is my >> FrameGrabber settings: >> >> >> >> Interval between VGA signals autoadjastments: 60 secs >> >> Offset: 30 >> >> Gain: 185 >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
