Hi,
I was scheduling a recording using MCD for 5 minutes, but after 1 hour the 
status is still capturing, from the log of MCD, it shows that :
May 29 14:29:33 MTH92512 user.info MH.ingest: Examining recording 5611 for 
possible ingestion
May 29 14:29:33 MTH92512 user.info MH.ingest: Examining recording 5638 for 
possible ingestion
May 29 14:29:34 MTH92512 user.info MH.ingest: Examining recording 5641 for 
possible ingestion
meanwhile,  I noticed that the indicator lights of MCD are all always yellow 
instead of red, which I think is innormal, I have reboot the device for many 
times, but it still didn't work. Other problem is that:
when I open the /preview.cgi webpage, I get nothing.
Is there anybody who can help me out?
The following is my configuration:
Firmware
FIRMWARE_VERSION="2.3.0e"
FIRMWARE_BUILD_HOST="tochilka 2.6.38-8-server"
FIRMWARE_BUILD_DATE="2012-03-22"
FIRMWARE_PLATFORM=VGA2CPU_DM365
FIRMWARE_ARCH=arm
FIRMWARE_SVNPATH=/branches/VGABROADCASTER_DAVINCI/2_3_0/epiphan/vga2web/subsys/base
  
Services status
Encoder: up 26 seconds
Broadcaster: up 28 seconds
Stream setupStream type:Flash video (H.264 codec) ASF stream (MPEG-4 codec) ASF 
stream (H.264 codec) Motion JPEG RTSP (MPEG-4 codec) RTSP (H.264 codec) Video 
encoding preset:Default High Quality High Speed Video encoding profile:Baseline 
Main High    Enhanced compatibility mode (h.264 slicing for RTP)DVI channelShow 
time label: Show substitutionsFrame size: x   pixels4:3 →640x480 768x576 
800x600 1024x7681152x864 1280x960 1600x120016:9 →640x360 1280x720 1600x900 
1920x1080Key frame interval:Limit frame rate:Bitrate: kbitsQuality parameter: — 
for MJPEG onlyVideo channel  Enable video channelVideo signal type:Composite 
S-Video Show time label: Show substitutionsFrame size:352 x 288 640 x 480 720 x 
576 720 x 480 Key frame interval:Limit frame rate:Bitrate: kbitsQuality 
parameter: — for MJPEG onlyPicture-in-picture layout:Independent streamsVideo 
inside DVI/VGAVideo outside DVI/VGACommon settingsRate control mode:Low Delay 
Storage Stream port:Audio settings  Enable audioAudio format:Raw PCM MP3 Audio 
sample rate (Hz):22050 44100 Audio channels:Mono Stereo Audio bitrate:32 kbps 
64 kbps 96 kbps 112 kbps 128 kbps 160 kbps 192 kbps 





2012-05-29



ZENG SHAN
Tel,861088236837
E-mail,[email protected]
Computing Center
Institute of High Energy Physics,CAS
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users

Reply via email to