Revised instructions for using the VirtualBox disk image, thanks to Chris
Patterson:
- Download, unzip and create a virtual machine with this disk image.
- The virtual machine must be setup with it’s network card in
‘Bridge’ mode so that *Mayan EDMS* may be accessible.
- Use: “Linux, 64bit Ubuntu” when setting up the virtual machine
- Boot the virtual machine, login (Username: mayan & Password: edms) and
type:
- sudo rm /etc/udev/rules.d/70-persistent-net.rules && sudo reboot
(password is edms)
- After reboot login again to get the IP address.
- Browse to the IP address of the virtual machine from a web browser.
On Monday, December 24, 2012 6:29:31 PM UTC-4, Roberto Rosario wrote:
>
> I've finished uploading an Ubuntu server 12.10 VirtualBox disk image with
> Mayan 0.13 working with Apache 2, SQLite, tesseract, LibreOffice, Unpaper
> and graphicsmagick. Until the website is updated, this is the link:
> http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13%20(Ubuntu%2012.10,%20Apache,%20SQLite).vdi.zip<http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13%20%28Ubuntu%2012.10,%20Apache,%20SQLite%29.vdi.zip>
>
> The file is almost 1GB compressed and about 3GB uncompressed.
>
> Download, unzip and create a virtual machine with this disk image. The
> virtual machine must be setup with it's network card in 'Bridge' mode so
> that Mayan may be accessible.
>
> Boot the virtual machine and enter the credentials:
>
> Username: mayan
> Password: edms
>
> to get the IP address.
>
> Tips, fixes, suggestions as always are most welcome.
>
> --Roberto
>
>
--
