Hi Mike,
> Hello Charles,
>
> On 02-Sep-99, Charles E Finkenbiner wrote:
> > Hi All,
> >
> > I use MD 1.3 and have had a problem come up. I have a couple of
> > messages that I want to reply to so I click on the reply to button,
> > the message window pops up and I enter my text. Then I press the
> > send button - nothing happens. After the send fails I press the
> > store button - again, nothing happens. The messages in question have
> > never been replied to before.
> >
> > I do not have this problem with 98% of my messages, only a couple of
> > them. Does anyone know whats going on with this?
>
> No but I had the problem with 1.2 and later 1.3 on my wife's machine
> (A2000 no gfx card). I found if I exited the read window, and left
> the message highlighted, I could respond or followup from the list
> window. It only happens periodically with 1.3.12, but got so bad
> with 1.2, I had to give up on the program, though I only discovered
> this workaround 2 weeks ago and was already using 1.3.12.
>
> On my wife's machine, the To, From and Subject lines fail to display
> in the read window and the mail fetching window, and I had to put
> them in her headers. I have never had any problems like this on my
> A3000 (128megs of ram vs 8, and a PicassoII running P96 1.43b
> 800x600x8 vs NTCS High Res Laced 720x480). Maybe the greater amount
> of ram (I have 2 chip, and 2 on the PII vs 1 chip for her) chip or
> fast or both or the gfx card makes the difference.
>
> BTW, to make this workaround work, you must set prefs to single
> screen, it won't work with the multiple screen setting. All of this
> makes me suspect memory or graphics card. MDII 1.3.12 seems to love
> my MKIII and my gfx card. I hope it works as well with the CV64 I'm
> putting in. Eventually I'll switch to CGX4, and I hope it likes it
> as well as it does Picasso96. Step by step here.
>
> BTW what is your computer, and how much fast and chip ram do you have,
> gfx card, AGA or ESC? Oh and on the outside chance scsi (fast-wide
> for me vs 2091 for her) or IDE has something to do with it, what is
> your controller?
>
I use MicroDot-II 1.3 (21.3.99) on my original A1000 with 512 Chip and
9 Meg. Fast RAM. It has an ICD AdSpeed accelarator and DKB KiwkStart
board which allows me to dual boot to 1.3 or 3.1 Amiga O/S. It uses a
2 slot slingshot card which has a GVP A4008 SCSI/Ram card, with 3
external devices and a A2065 ethernet card connected to my Amiga/IBM
network.
I will try your idea, thanks.
Charles
>
> Regards,
> --
> Mike Leavitt [EMAIL PROTECTED] + team Amiga +
>
>
>
> ________________________________________________________________
> MicroDot-II Mailing List - Info & Archive: http://www.vapor.com/
> For Listserver Help: <[EMAIL PROTECTED]>, "HELP"
> To Unsubscribe: <[EMAIL PROTECTED]>, "UNSUBSCRIBE"
>
________________________________________________________________
MicroDot-II Mailing List - Info & Archive: http://www.vapor.com/
For Listserver Help: <[EMAIL PROTECTED]>, "HELP"
To Unsubscribe: <[EMAIL PROTECTED]>, "UNSUBSCRIBE"
