"Tom P.D. Daniels" <[EMAIL PROTECTED]> writes: > I also have a question. I've been trying to connect various equipment to my > sony car head (MDX-C7890R) but to no avail. On researching it I found out > that I needed to also connect the changer control. But since I'm not using > a sony changer I don't have that. A solution offered by Sony is a small box > that sits between the source and the car head. the downside to this that, > like almost every accesoire sold by Sony, it's very expensive. About 150$ > in the Netherlands (where I life...) which is IMO pretty steep. So my > question is; is there any CHEAP way to get my car head to accept an aux > source ? I mentioned the Unilink adapter from Sony (which you are apparently aware of) in my previous mail. I just wanted to add that if someone were to buy the Sony adapter and reverse engineer it, we'd be happy to post plans on the MDCP. Paying $100 or more for a few resistors and a connector is something MD hobbyists should be able to avoid. Rick ----------------------------------------------------------------- To stop getting this list send a message containing just the word "unsubscribe" to [EMAIL PROTECTED]
Re: MD: Connecting non-sony gear to my Sony MD car head
Eric Woudenberg, Minidisc.org Editor Mon, 14 May 2001 07:59:50 -0700
- MD: Connecting non-sony gear to my So... Tom P.D. Daniels
- Re: MD: Connecting non-sony gear... Sean Snyders
- Re: MD: Connecting non-sony gear... Tom P.D. Daniels
- Re: MD: Connecting non-sony gear... Eric Woudenberg, Minidisc.org Editor
- Re: MD: Connecting non-sony ... Sean Snyders
