I just tried another test with Startup RAM set at 2048 MB not using Dynamic Memory. WinPE loads fine and the OS is installed. However, I get the following error at first boot
Windows Boot Manager Windows failed to start. A recent hardware or software change might be the cause.. Status: 0xc0000001 If I load the normal Windows Server 2012 DVD then I can install the old fashioned way then the OS loads without issue. It's only when I deploy Server 2012 via MDT. From: [email protected] [mailto:[email protected]] On Behalf Of Michael Niehaus Sent: Thursday, November 21, 2013 1:03 PM To: [email protected] Subject: RE: [MDT-OSD] Issue building Hyper-V VM in MDT Make sure to specify at least 1GB of RAM (the default is 512MB) and if using dynamic memory set the minimum RAM to at least 1GB as well. (Windows PE struggles if there isn't enough RAM.) Thanks, -Michael From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of [email protected]<mailto:[email protected]> Sent: Thursday, November 21, 2013 9:53 AM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] Issue building Hyper-V VM in MDT I'll try it on my lab host tonight. Christopher Catlett Consultant | Detroit [MCTS_2013_small] Sogeti USA Office 248-876-9738 |Fax 877.406.9647 26957 Northwestern Highway, Suite 130, Southfield, MI 48033-8456 www.us.sogeti.com<http://www.us.sogeti.com/> From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Brian Marobella Sent: Thursday, November 21, 2013 12:50 PM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] Issue building Hyper-V VM in MDT I've tried both Gen1 and Gen2 From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of [email protected]<mailto:[email protected]> Sent: Thursday, November 21, 2013 12:46 PM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] Issue building Hyper-V VM in MDT Are you using a generation 1 or 2 vm? Christopher Catlett Consultant | Detroit [MCTS_2013_small] Sogeti USA Office 248-876-9738 |Fax 877.406.9647 26957 Northwestern Highway, Suite 130, Southfield, MI 48033-8456 www.us.sogeti.com<http://www.us.sogeti.com/> From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Brian Marobella Sent: Thursday, November 21, 2013 12:25 PM To: [email protected]<mailto:[email protected]> Subject: [MDT-OSD] Issue building Hyper-V VM in MDT Hello, It has been impossible to build Server 2012 OS on a VM in Server 2012 R2 Hyper-V host using MDT 2013 ADK 8.1. The VM freezes at the Windows logo screen. The only way I can build Server 2012 is to use the Windows 2012 DVD. Do I have to inject any drivers in MDT? Is this a known issue? It is quite frustrating when you cannot build a Microsoft OS using Microsoft technology. Any help or suggestions would be great. Thanks
<<inline: image001.jpg>>
