Admittedly this is not confirmed. I had our network team compare switch configs on a segment that worked and one that didn’t and this was the difference. The changes have not been made yet on the segment that cant PXE boot, so once they are I will confirm if they resolve our issues.
Daniel Ratliff From: [email protected] [mailto:[email protected]] On Behalf Of Olsson Mats Sent: Wednesday, April 30, 2014 7:28 AM To: [email protected] Subject: SV: [MDT-OSD] Lenovo ThinkPad models starting to require KMDF 1.11 I’n not a Switch guru but we do use Cisco Switches. Spanning-tree and portfast are enabled but you shouldn’t need trunk on a client port /Mats Från: [email protected]<mailto:[email protected]> [mailto:[email protected]] För Daniel Ratliff Skickat: den 30 april 2014 13:19 Till: [email protected]<mailto:[email protected]> Ämne: RE: [MDT-OSD] Lenovo ThinkPad models starting to require KMDF 1.11 The switches that are working for PXE boot have spanning-tree portfast trunk enabled. The others do not have it enabled. We have seen the PXE boot issues on the L440 and Yoga specifically. Daniel Ratliff From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Daniel Ratliff Sent: Tuesday, April 29, 2014 9:33 PM To: '[email protected]' Subject: RE: [MDT-OSD] Lenovo ThinkPad models starting to require KMDF 1.11 Yep. -Daniel Ratliff -----Original Message----- From: Roger Truss [[email protected]<mailto:[email protected]>] Sent: Tuesday, April 29, 2014 09:30 PM Eastern Standard Time To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] Lenovo ThinkPad models starting to require KMDF 1.11 Cisco switches by chance? We are also looking into that possibilty as well. On Apr 29, 2014 8:23 PM, "Daniel Ratliff" <[email protected]<mailto:[email protected]>> wrote: Nope, it's won't get through Windows setup. However I might know your issue. We have had pxe issues on some subnets with certain newer models. I haven't confirmed yet but we think the issue is switch related. I'll check the ticket we have and send the switch config tomorrow. -Daniel Ratliff -----Original Message----- From: Roger Truss [[email protected]<mailto:[email protected]>] Sent: Tuesday, April 29, 2014 09:15 PM Eastern Standard Time To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] Lenovo ThinkPad models starting to require KMDF 1.11 This issue could not affect pxe itself would it? I have a location that can pxe t440p but not w540 thinkpads. On Apr 22, 2014 9:38 PM, "Daniel Ratliff" <[email protected]<mailto:[email protected]>> wrote: I could never get it to install during the ts. Just started rebuilding our image today. The update applied to the image during the build but the os still wouldn't load on the reboot. Not on the t540p anyway. Dism showed the update as 'install pending'. -Daniel Ratliff -----Original Message----- From: Brian Klish [[email protected]<mailto:[email protected]>] Sent: Tuesday, April 22, 2014 08:07 PM Eastern Standard Time To: [email protected]<mailto:[email protected]> Subject: Re: [MDT-OSD] Lenovo ThinkPad models starting to require KMDF 1.11 Cool. Thank you. On Mon, Apr 7, 2014 at 5:06 PM, Daniel Ratliff <[email protected]<mailto:[email protected]>> wrote: I know Dell started a while back, but now Lenovo is requiring KMDF 1.11 on some models. For me it’s the ThinkPad T540p, the W540 is also mentioned. http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t540p-w540_w764_201403.txt NOTES - To install Input(Ultranav) and Security(AMT) driver on the deployment package properly, you need to add KMDF1.11 by referring to website (http://www.microsoft.com/en-us/download/details.aspx?id=38423). Here is a good article on applying it during the TS if you cant update your image immediately. http://deploymentramblings.wordpress.com/2013/10/24/osd-injecting-the-windows-7-kernel-mode-driver-framework-kmdf/ Daniel Ratliff The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
