http://support.lenovo.com/us/en/documents/ht100612
From: [email protected] [mailto:[email protected]] On Behalf Of Bain.John Sent: Tuesday, February 10, 2015 11:55 AM To: [email protected] Subject: RE: [MDT-OSD] Lenovo TPM Chip Activation CAUTION: External Have a link to the script ? If not maybe dump it in a gist https://gist.github.com/ Off topic, but I've never had to load the HAPI drivers before running the CCTK commands ... they have always just worked ... even on a new deployment From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Denzik, Josh Sent: February 10, 2015 11:47 AM To: [email protected]<mailto:[email protected]> Subject: RE: [MDT-OSD] Lenovo TPM Chip Activation I haven't tried it yet, I was comparing what I had to do for the Dells, i.e. load the HAPI driver in WinPE to use the CCTK commands. Can you use the same SetConfig.vbs for Lenovo in WinPe as well? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Bain.John Sent: Tuesday, February 10, 2015 11:34 AM To: '[email protected]' Subject: RE: [MDT-OSD] Lenovo TPM Chip Activation CAUTION: External Are you having issues running vbscripts in WinPE ? What is your hurdle ? John From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Denzik, Josh Sent: February 10, 2015 11:24 AM To: [email protected]<mailto:[email protected]> Subject: [MDT-OSD] Lenovo TPM Chip Activation All, I've been looking around the net and found the vbs scripts Lenovo gives to turn on the tpm, having a hard time finding a guide to turn it on during the WinPe phase so I can pre-provision the machine for bitocker. Is there a way to do this with Lenovos? Any help or guidance on this is greatly appreciated, -Josh
