Do you happen to know what driver is required so that WinPE can see the SATA 3
M.2 hard drive??
________________________________
John Marcum
MCITP, MCTS, MCSA
Desktop Architect
Bradley Arant Boult Cummings LLP
________________________________
[MVP] <https://mvp.microsoft.com/en-us/overview>
[MMS] <http://mmsmoa.com/>
From: [email protected] [mailto:[email protected]] On
Behalf Of Keiffer, Scott
Sent: Monday, April 11, 2016 2:18 PM
To: [email protected]
Subject: [MDT-OSD] RE: Imaging Dell Precision 5510
The usb-c ethernet adapter. Here is the link:
http://www.dell.com/support/home/us/en/RC959239/Drivers/DriversDetails?driverId=CFXPV&fileId=3525705819&osCode=WT64A&productCode=precision-m5510-workstation&languageCode=en&categoryId=NI
- Scott
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Marcum, John
Sent: Monday, April 11, 2016 1:16 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Imaging Dell Precision 5510
When you say "network driver" do you mean for the specific NIC I am using or
for thunderbolt itself?
________________________________
John Marcum
MCITP, MCTS, MCSA
Desktop Architect
Bradley Arant Boult Cummings LLP
________________________________
[MVP] <https://mvp.microsoft.com/en-us/overview>
[MMS] <http://mmsmoa.com/>
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Keiffer, Scott
Sent: Monday, April 11, 2016 8:34 AM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] RE: Imaging Dell Precision 5510
John,
In case you have not figured it out. In order to PXE boot you need to enable
Thunderbolt Pre-Boot and Boot support options in the usb/thunderbolt
configuration settings section of the bios. As of winPE 1511 you still need the
network driver and if you have the SATA mode set to RAID you will also need
that driver as well. This applies to all the new Dells with thunderbolt that we
have tested.
- Scott
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Marcum, John
Sent: Friday, April 8, 2016 3:57 PM
To: [email protected]<mailto:[email protected]>
Subject: [MDT-OSD] Imaging Dell Precision 5510
Has anyone successfully imaged a Dell Precision 5510 with the lightening
adapter NIC? What needs to happen to make that work?
________________________________
John Marcum
MCITP, MCTS, MCSA
Desktop Architect
Bradley Arant Boult Cummings LLP
________________________________
[MVP] <https://mvp.microsoft.com/en-us/overview>
[MMS] <http://mmsmoa.com/>
________________________________
Confidentiality Notice: This e-mail is from a law firm and may be protected by
the attorney-client or work product privileges. If you have received this
message in error, please notify the sender by replying to this e-mail and then
delete it from your computer.
