Government lab tests 'super' power cables for NYC

By DUNCAN MANSFIELD
Associated Press

March 25, 2009

http://www.google.com/hostednews/ap/article/ALeqM5iZbBDMulEOhytkyU6QAS-YbyH9NAD9756CC81


OAK RIDGE, Tenn. (AP) — A high-tech power cable designed to prevent rolling 
blackouts caused by everything from a wayward squirrel to terrorists is 
being readied for New York City's financial district.

Now undergoing final tests at the Oak Ridge National Laboratory, the 
superconductor cable to be installed in Manhattan next year could prove key 
to the smart, secure, super grid of the future.

Scientists fired 60,000 amps through a cable during a critical test Tuesday 
— an electrical jolt comparable to turning on the air conditioning in 2,000 
homes at the same time. It was enough juice to lift a 1,000-pound bundle of 
conventional cable 2 feet off the ground.

But nothing seemed to happen. No sparks, no sound, no movement.

A roomful of invited government and corporate observers waited for an 
explanation.

"Bottom line is, it worked," said Patrick Murphy, project manager for the 
Department of Homeland Security. The guests broke into applause.

"It was spectacularly unspectacular, which was exactly what we wanted," 
said Brad Buswell, Homeland Security's acting undersecretary for science 
and technology.

Chilled by liquid nitrogen to minus-321 degrees Fahrenheit, this cable 
becomes super-efficient when cool, carrying up to 10 times more electricity 
than a copper cable of the same diameter. It also has a unique, built-in 
surge suppressing capability.

"Nothing is attack proof," Murphy said. But this cable could be a 
cornerstone of what he calls "resilient reinforcing microgrids."

Power distribution now follows a hub-and-spoke design. That means the 
failure of a single power station can put a cluster of neighborhoods in the 
dark. This latest superconductor cable promises to link power stations so 
they can operate "more like an Internet" and back each other up.

Homeland Security calls the Oak Ridge-Manhattan experiment "Project Hydra," 
recalling the many-headed beast of Greek mythology that grew two heads for 
every one cut off.

The $39 million project will lay superconductor cable linking two large 
Consolidated Edison Corp. substations about 1,000 feet apart serving 
thousands of people on Manhattan's west side. For security reasons, the 
stations have not been publicly identified.

The Oak Ridge lab, a Department of Energy facility, has been conducting 
basic research on superconducting wire for two decades. Since 2000, 
American Superconductor Corp. of Devens, Mass., has been working to refine 
and commercialize that research under a licensing partnership.

Less than a year ago, Oak Ridge scientists were still testing the new 
cables in an open bath of foggy liquid nitrogen. They are now testing the 
final prototype, which has layers of superconductive wire ribbon wrapped 
around a liquid nitrogen core.

"When you get it cold below superconducting transition temperature, it can 
carry an enormous amount of current," explained Chris Rey, who is 
overseeing the Oak Ridge tests.

In normal operation, the superconductor wire has little or no loss of 
electrical current known as resistance. But when a power spike occurs that 
could lead to a blackout, the cable comes out of its superconductor state 
and acts "exactly like a surge protector," he said. The extra electricity 
dissipates as heat.

American Superconductor CEO Greg Yurek said there have been 15-20 
superconductor cable projects of various kinds built around the world since 
1997. Project Hydra will be the first with "fault limiter" capability to 
suppress surges — a kind of firewall for the grid.

"Our sense is we are kind of at the tipping point now, once we are in 
Manhattan," Yurek said. "The eyes of the utility world are actually viewing 
this with great interest."

Terrorists are not the only threat to the power grid. So is the growing 
consumers demand for electric gadgets from plasma TVs to plug-in electric 
vehicles.

The cascading 2003 blackout that affected millions from the Midwest to the 
Northeast began with a single sagging power line in Ohio. The cost for 
repairs and losses to commerce: $6 billion to $10 billion, according to 
Homeland Security.

"So we see that as a pretty important mission — to keep the lights on," 
Murphy said.

Superconductor electrical cables are not for everyone and everywhere. They 
cost about twice as much as copper cable and require special expertise to 
maintain the nitrogen coolant.

In urban settings like Manhattan, however, where utility pipes, cables and 
water lines are as crowded underground as the vehicles on the streets above 
them, the advantages may balance out.

"Space and real estate in New York are very hard to come by and anyone who 
has seen an underground dig in Manhattan, particularly, knows the very, 
very congested situation you have underground," Consolidated Edison 
spokesman Mike Clendenin said.

"The superconductors offer the promise that they can take much more 
electricity through a much smaller cable," he said. "If it works, it truly 
is what fiber optics did for telecommunications."

Buswell said that while the financial district of New York was an obvious 
spot for an initial installation of resilient superconductors, he's sure 
"there are dozens of other places around the country that would be 
interested in being hardened for energy continuity," such as emergency 
command centers.

"We have to get a success first," he said after the Oak Ridge test. "And I 
think this was a big milestone towards that success."


=================================================
George Antunes                    Voice (713) 743-3923
Associate Professor               Fax   (713) 743-3927
Political Science                    Internet: antunes at uh dot edu
University of Houston
Houston, TX 77204-3011         

***********************************
* POST TO [email protected] *
***********************************

Medianews mailing list
[email protected]
http://lists.etskywarn.net/mailman/listinfo/medianews

Reply via email to