All messages should be posted in plain text. HTML will be converted to attachments. The meditech-l web site is MTUsers.com ======================================
We now have Exitcare, and are wanting to set things up so that each registration is automatically fed over to Exitcare. We've done quite a bit of homework on this, but still are not successful. We're looking for someone who's done this. Here's where we are now: 1. We have a server set up with Exitcare on it. Additionally, we've defined a virtual printer on it for file download. The printer is called (if you can believe this) "ExitCare". 2. We have a printer set up under Manage Open Systems in the OPS menu of Meditech. It too is called Exit Care and its parameters are as follows: Printer EXITCARE Description SCRIPT RX Model LPR/LCD TCP Port 515 Nagle N Remote Host EXITCARE Remote Name EXITCARE 3. The remote host is set up for the IP address of the server in question. 4. We have a file (from Exitcare) called ADM.PAT.zcus.hubit.dwp.exitcare, which is programmed (in TEST) into our face sheet. 5. We also have a file ADM.PAT.zcus.adm.form9 that will print what we want manually. 6. We have tested the manual download to insure that the data can be read by Exitcare. (It can.) 7. We have set up 9 as a form under ADM Cust Defined Parameters (in TEST). We have also set it to produce a filename based on the acct number with the mqi extension. 8. We have edited the file (under #5 above) to select for /urn and tried to run it. 9. The file goes to the virtual printer, but remains hung there and never gets to its destination on the server. I'd truly appreciate some help with this one from any of you with experience. Douglas B. McGaw Hospital Info Svcs Coordinator Newman Regional Health 1201 W. 12th Ave. Emporia, KS 66801 Voice: 620-343-6800 x 1130 Fax: 620-340-6133 Email: [EMAIL PROTECTED] _______________________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
