All messages should be posted in plain text. HTML will be converted to attachments. The meditech-l web site is MTUsers.com ======================================
I think the key is the hardware - a "Very High Density"
(VHD) wand is required. I have had good success with the Welsh-Allyn
product.
Best of luck - Kevin.
Kevin McConnell,
PharmD.
Clinical
Consultant
(713)480-6810
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Garner, Chuck
Sent: Thursday, June 01, 2006 1:03 AM
To: [email protected]
Subject: [MEDITECH-L] 2D barcodes for BMV
Meditech
L:
We are currently
implementing BMV in C/S 5.5 SR2. One of the issues we are
running into is 2D barcodes on some packaging from our pharmaceutical
suppliers. We are using Datalogic Gryphon BT200
scanners. 128's and 39's work OK. We
have also tested the scanners on generic 2D barcodes (examples from
web sites) with success. However, we are not able to
successfully scan our prepackaged meds that have 2D barcodes. They
appear very condensed and have little whitespace around
them.
Does anyone have any
experience with 2D barcodes? We would be interested in any
configuration considerations, workarounds, solutions, or suggestions you might
have.
_________________________
CHUCK GARNER,
CNE
MCSE
Director, Information
Technology
UNITED GENERAL HOSPITAL
2000 Hospital Drive
Sedro-Woolley
WA 98284
Direct: (360) 856-7550
Fax: (360)
856-7204
Mobile:
(360) 770-7424
Website:
www.unitedgeneral.org
_________________________
This email may
contain confidential and privileged material for the sole use of the intended
recipient. Any review or distribution by others is strictly prohibited. If you
are not the intended recipient please contact the sender and delete all
copies.
_______________________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
