All messages should be posted in plain text. HTML will be converted to attachments. The meditech-l web site is MTUsers.com ======================================
Sorry if this gets posted twice, the message was returned for some reason. Carol/Bill, In regards to your problems with this report, I found KB article 19905 that describes a similar process to setting up Bill's report. I tried Bill's report as well as creating the one in the KB article, and I got the same results as you guys got. I could pull info from ABS, ADM, MRI, PRV, and SCH, but no info from the clinical or financial modules. I opened a task with MEDITECH to find out why it was not pulling information from the other modules since they had posted an article about this type of report. Our RW specialist said that the report was pulling information from all applications on our "A" segment (since the NPR application is on our "A" segment). The applications I mentioned above are on our "A" segment as well. The solution he offered, which he even noted was not an ideal solution, was to attach the report to a menu from a module of each segment. He said that this has been an issue in the past. In our case, I had to attach the report to a menu of all segments, because our clinical modules are on the "B" segment, our financial modules are on "C" (to pull patient account access from BAR), and Pharmacy is on "D". I would have 4 reports, but I would have all of the access information from all applications, right? Wrong. I then ran into another problem...I could not pull any info from RAD. I tried attaching the report to both RAD and RADRW menus, which did not work. MEDITECH did not have a solution for pulling RAD info onto this report since it was a $T application, so I had to go in a different direction. I created a different report under the RADRW.UA DPM to pull this information. So that makes a total of 5 reports. I wanted to let everyone know that there was a workaround for this problem, and it does work, but it would be better if all of the info could be combined onto 1 report. Hopefully, someone out in "L" land will be able to figure out how to do this! Thanks, Jay Gilmore Systems Analyst Crisp Regional Hospital (229) 276-3173 > ----- Original Message ----- > From: Carol Higley > To: Bill Mullins > Cc: [email protected] > Sent: Monday, October 02, 2006 10:09 AM > Subject: RE: [MEDITECH-L] Patient Audit Trail By User > > > All messages should be posted in plain text. HTML will be converted to > attachments. The meditech-l web site is MTUsers.com > ====================================== > > > > > > If someone figures it out and can make the changes please let us know. The > report looks great if we could just get the clinical apps as well. > > Carol > > > Carol L. Higley > Data Systems Analyst > Howard Regional Health System > 765-453-8140 > > The opinions expressed in this e-mail message are those of the author and > may not be representative of Howard Regional Health System or affiliates. > This e-mail message and attachments, if any, may contain confidential or > privileged information. If you are not the addressee or authorized to > receive this message for the addressee, you must not use, copy, disclose, or > take any action based on this message, any attachments to this message, or > any information herein. If you have received this message in error, please > advise the sender immediately by reply e-mail and delete this message in > entirety. > > > >>> "Bill Mullins" <[EMAIL PROTECTED]> 9/29/06 5:36 PM >>> > > Your right, I never noticed that. I work in IS and do not document or enter > orders in LIVE on patients, just in TEST. > I am not sure why the report is not getting the clinical modules. It is > capturing both clinical and non-clinical users, but for routines in > ADM,ABS,MRI,SCH only? > Thanks for catching this. > I will see if I can figure this out (Joe C,Brian S,Double T and all you > smart programmers or just good npr writers out there, here is a challange). > > > > From: Carol Higley [mailto:[EMAIL PROTECTED] > Sent: Friday, September 29, 2006 2:32 PM > To: Bill Mullins > Subject: RE: [MEDITECH-L] Patient Audit Trail By User > > Bill, It appears you report is not looking at any of the clinical > applications. Am I missing something? When I run it, it only shows ADM, > SCH, ABS. > > Thanks. Carol > > > Carol L. Higley > Data Systems Analyst > Howard Regional Health System > 765-453-8140 > > The opinions expressed in this e-mail message are those of the author and > may not be representative of Howard Regional Health System or affiliates. > This e-mail message and attachments, if any, may contain confidential or > privileged information. If you are not the addressee or authorized to > receive this message for the addressee, you must not use, copy, disclose, or > take any action based on this message, any attachments to this message, or > any information herein. If you have received this message in error, please > advise the sender immediately by reply e-mail and delete this message in > entirety. > > > >>> "Bill Mullins" <[EMAIL PROTECTED]> 9/27/06 4:58 PM >>> > All messages should be posted in plain text. HTML will be converted to > attachments. The meditech-l web site is MTUsers.com > ====================================== > ********************************************************************** > This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom they > are addressed. > This footnote also confirms that this email message has been swept by Sophos > and MIMEsweeper for the presence of computer viruses. > ********************************************************************** > > > > _______________________________________________ > meditech-l mailing list > [email protected] > http://mtusers.com/mailman/listinfo/meditech-l > _______________________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
