Hi
Cory,
The following should
work for you:
1) Create an xx
field to be placed at the beginning of the line that will have the
underlining.
2) Use the following
attributes for the xx field:
DAT=FREE
JFY=L
LEN=1
VAL=IF{L(@field)^/R.GR["US","DPM.zcus.report.R.1",10],
VAL=%Z.rw.graphics("","","","","","",1,"DPM.zcus.report.R.","","D"),""}
JFY=L
LEN=1
VAL=IF{L(@field)^/R.GR["US","DPM.zcus.report.R.1",10],
VAL=%Z.rw.graphics("","","","","","",1,"DPM.zcus.report.R.","","D"),""}
You will need to
replace @field with the field you are underlining. You will also need to
replace DPM with the DPM of your report, and report with the name of your
report. Also, 10 is the column at which to begin the underlining.
You can replace it with whichever column # you like. On Page 3, on your
report picture, in MAGIC, you can press <Ctrl> <F1> to see the exact
column #. In CS, it is <Ctrl><F2>, I
think.
3) You can then put
the field you want to underline on that line.
Please let me know
if you have any questions.
Good
luck,
Brian Schmit
Sr. Programmer, Picis
Direct: 781 557
3315
Fax: 781 557 3140
100 Quannapowitt Parkway
Suite 405
Wakefield,
MA 01880
[EMAIL PROTECTED]
www.picis.com
Please visit http://www.picis.com/services/technical/npr.asp# for
additional information about our NPR Report Writing Trainings.
The
information in this email is confidential and may be legally privileged. It is
intended solely for the addressee. Access or use by any other person to this
internet email is not authorized and may be unlawful. If you are not the
intended recipient, please delete or destroy this email. If you do not wish to
receive future emails from the sender, please reply directly to this email
requesting you be removed from any mailing list.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Bell, Cory
Sent: Wednesday, October 25, 2006 3:53 PM
To: [email protected]
Subject: [MEDITECH-L] NPR RW HelpHi,Does anyone out in L land know how to underline a field, but only the characters that print, not the whole allotted length of a field? As an example, I want to underline a field that could possibly be 50 characters long. When the field prints, it may print data within that field that is only 30 characters in length. Using the standard bold function in the RW it underlines the whole 50 characters allotted leaving 20 blank spaces underlined on the output. I only want to underline the characters that print. The Meditech RW specialist was unable to tell me how to do this.Thanks,Cory
====================================== All messages should be posted in plain text. HTML will be converted to attachments.
The meditech-l web site is MTUsers.com ______________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
