Is there a Magic facility out there who has figured out how to get quality control to transmit, match, and file (2 out of 3 still isn't good enough) quality control from a Sysmex UF-50 Urine Analyzer (when run in the QC mode)? I performed a Device Watch to see what the analyzer sends and saw a D1 transmitted prior to the C3 qc identifier. When I can get Meditech to match specimens, all results show as NP regardless of the instrument counts. I'd appreciate any information or suggestions.
Thanks, Paul Paul Goedicke IT Analyst III Jackson County Memorial Hospital 1200 E.Pecan, Altus, OK 73521 Phone: (580) 477-7485 Fax: (580) 477-7366 Email: [EMAIL PROTECTED] The documents accompanying this transmission contain confidential information, belonging to the sender, that is legally privileged. This information is intended only for the use of the individual or entity named above. The authorized recipient of this information is prohibited from disclosing this information after its stated need has been fulfilled. If you are not the intended recipient, you are hereby notified that any reading, disclosure, copying, distribution, or action taken in reliance on the contents of these documents is strictly prohibited. Violators may be prosecuted. If you have received this email in error, please notify the sender immediately and destroy the transmitted information. =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= To subscribe or unsubscribe to the meditech-l, visit MTUsers.COM. To check the status of the meditech-l, visit MTUsers.NET. For help, email [EMAIL PROTECTED] ______________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
