Have you tried waving the scanning wand very close to the barcode. Almost touching it. Also, make sure that the darkness is set to at least 10. We're using Zebra Printers, seems to work fairly well.
Let me know. Carlo Angione Programmer Analyst II Johns Hopkins Bayview Medical Center Information Services Mason F. Lord Building, Suite 5000, 5th Floor 4940 Eastern Ave Baltimore, Md 21224 Voice: (410) 550-2394 [EMAIL PROTECTED] >>> Janet Austin <[EMAIL PROTECTED]> 2/1/2007 7:53 AM >>> We are implementing BMV in a couple of weeks and are having some difficulty with getting the BARCODES to scan on the wristbands consistently. Our scan rate is about 1 x out of 10. We use the Symbol DS 6608 scanners which are scanning the meds really well but can't get to that success levels with the bands. Has anyone got any words of advice or help. We have horizontal and vertical on the bands. =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= To subscribe or unsubscribe to the meditech-l, visit MTUsers.COM. To check the status of the meditech-l, visit MTUsers.NET. For help, email [EMAIL PROTECTED] ______________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
