Since the colors are determined by windows settings isn't this a complaint for 
Microsoft?  Or is it perhaps the font that is the real complaint?

>>> "Walecka, Wendy" <[EMAIL PROTECTED]> 04/27/07 3:37 PM >>>
Hi Scott,
 
We had some general complaints about eyestrain.  We were told all along that
there was going to be some measure of color customization in 5.6, but I
cannot say I have seen much of it.  I know the NUR status board and EMAR
have a few more colors.  And the new version of the EMAR, which was not
quite ready for primetime when we got 5.6 into TEST, was totally revamped
with more colors.  We were very disappointed to know we were not going to
have that available to us as we expected and I'm not sure when it will be
ready.  However, you can customize the Windows color settings for a little
more variation.  I particularly like the Rose or Plum color schemes.
 
One thing to keep in mind is that the following applications require the NUI
if you intend to upgrade to 5.4, 5.5, or 5.6:
ABS (Utilization Review Routines)

BMV (Bedside Med Verification)

EDM (Emer Dept Mgmt)

NUR (Status Board/Process Flowsheet enhancements)

OR (OR Management)

SCA (Scanning/Archiving)

RM/QM (Risk Mgt/QM)

PCM SUITE (We don't have any of these) 

MPM SUITE (OP Scheduling Module)

(Phys/Bill Rcv/PBR - LSS Billing)

ITS (Imaging & Ther Svcs - which we do not have)

eMAR Desktop (PHA/NUR) Windows Resolution 1024x768 Workstation size - Medium

OE (Order Set Dictionary)

We learned this as we were preparing to go live with 5.61, and we just did
yesterday, so things are still shaking out.  And we still have some diehard
3x workstation users.  I started in my position about a year and a half ago
and we have been promising the old version is going away and it still has
not.  I hope this helps.

Thanks! 

Wendy 
Sr. Clinical Systems Analyst 
Ph: (920) 628-9423 
Pager: (920) 554-3437 
Email:  [EMAIL PROTECTED] 

 

   _____  

From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of
White, Scott A
Sent: Thursday, April 26, 2007 12:04 PM
To: [email protected]; Till, Nan H; Pidgeon, Mark
Subject: [MEDITECH-L] Meditech and the NUI 4.20 problems


Hello all, I'm posting this on behalf of a couple of our Analysts here at
Saratoga Hospital.
 
 
"We are in the process of having our users test Meditech's NUI 4.20 with the
anticipation of removing the old 3.x version in the next few months. Most of
the complaints we are receiving are related to the colors of the menus and
lookups. Users are complaining of eye strain and headaches because things
just don't stand out like the colors provided in the older versions. 
Can anyone tell us if you experienced the same problems and how you handeled
it with your users?"
 
 
If you have any comments and wish to respond directly to someone instead of
broadcasting to the "L", please email
either Nan Till    <BLOCKED::mailto:[EMAIL PROTECTED]>
[EMAIL PROTECTED]   or  Mark Pidgeon  [EMAIL PROTECTED] 
<mailto:[EMAIL PROTECTED]> 

 

 
Thank you,
Scott White
I.S. - Application Services Manager
Saratoga Hospital
 

 


   _____  

CONFIDENTIALITY NOTICE: This e-mail communication and any attachments
may contain confidential and privileged information for the use of the
designated recipients named above.  If you are not the intended
recipient, you are hereby notified that you have received this communication
in
error and that any review, disclosure, dissemination, distribution or
copying
of it or its contents is prohibited. If you have received this
communication in error, please notify Saratoga Hospital immediately by
e-mail at
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>  and destroy all
copies of this communication
and any attachments.




=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET.

To check the status of the meditech-l, visit MTUsers.NET.

For help, email [EMAIL PROTECTED]

Visit the MTUsers WikiPedia at MTUsers.NET/mwiki
______________________________________
meditech-l mailing list
[email protected]
http://mtusers.com/mailman/listinfo/meditech-l

Reply via email to