Can you recommend this to look at http://www.realviewice.com/写道： Hi I
currently bought a devkit8000 (beagleboard clone ) system and trying to install
Meego on it. I changed the u-boot, built the kernel, built Meego image and
putall into SD card. The system boot up correctly and I am able to run
SGXdemo. Here is the question. How can I enable USB keyboard and
mousecapability? Currently I display Meego UI thru DVI. andy
_______________________________________________ MeeGo-devmailing list
[email protected] http://lists.meego.com/listinfo/meego-dev 附件(0 个)
&langpair=en|zh-CN">
Thank you
------------------ 原始邮件 ------------------
发件人: "Andy Lee"<[email protected]>;
发送时间: 2010年9月28日(星期二) 晚上6:40
收件人: "Chen Dai"<[email protected]>;
抄送: "meego-dev"<[email protected]>;
主题: Re: [MeeGo-dev] Questions for displaying mouse cursor !!
Here is it.
1. update u-boot to 2010.06
2. download kernel from 2.6-stable-devkit8000
3. get the board-devkit8000.c, id.c, id.h from
gitorious.org/devkit8000/linux-omap-devkit8000.git and replace the one in
2.6-stable-devkit8000.
( this step is very important. otherwise you wont get DM9000 and USB......etc
work )
4.build 2.6-stable-devkit8000 ( result: uImage 4.3M)
5. Follow meego on beagleboard from scratch and create rootfs and SGX driver.
4.0.0
6. SD card needs to have SWAP partition.
7. set u-boot command omapdss.vrm=0:12M,1:0M,2:0M (in my case, 4M:4M:4M does
not work for me)
From: Chen Dai
Sent: Tuesday, September 28, 2010 6:09 PM
To: Andy Lee
Cc: [email protected]
Subject: Re: [MeeGo-dev] Questions for displaying mouse cursor !!
Hi Andy,
Can you share the detail step about "built the kernel, built Meego image and
put all into SD card",
Because I can't boot form SD card, and can't display the UI.
I really need you help, please help me.
Thanks in advance!
Chen
在 2010年9月28日 下午5:58，Andy Lee <[email protected]>写道：
Hi
I currently bought a devkit8000 ( beagleboard clone ) system and trying to
install Meego on it. I changed the u-boot, built the kernel, built Meego image
and put all into SD card.
The system boot up correctly and I am able to run SGX demo. Here is the
question. How can I enable USB keyboard and mouse capability? Currently I
display Meego UI thru DVI.
andy
_______________________________________________
MeeGo-dev mailing list
[email protected]
http://lists.meego.com/listinfo/meego-dev_______________________________________________
MeeGo-dev mailing list
[email protected]
http://lists.meego.com/listinfo/meego-dev
