On 3/10/2011 7:09 AM, Sreekanth Muralidharan wrote:
Hi All
I am developing a module on Moorestown platform running MeeGo. During
the development stage, I had this problem of hooking my module to a
PMIC interrupt. The PMIC documents related to D9975/D9976 gives a
guideline on the architecture of this PMIC I am working on. Here I
need to get an interrupt from a power button. The PMIC(into which
power button is connected to) is interfaced with a System Controller
Unit, Langwell, which instead is interfaced with an IA32 processor.
The SCU document says that the interrupt vector which is associated
with this interrupt (PMIC_INT) from PMIC is at 10. In another section
of the same document, it says that PMIC GPIOs are connected to the
interrupt line 18. There are other PMIC interrupts in different lines,
where we associate those lines for battery, ADC, Audio, Touch screen
and so on.
To confuse better, there's another revision of the document for
Langwell which says that a GPIO line (GPIO Line 2) is dedicated to
interrupt from PMIC.
It would be very helpful, if anyone could throw some light into this.
In brief, I would like to get information on which interrupt line we
should be requesting for an interrupt from Power Button in PMIC. A
quick response would be appreciated.
Hi,
I think you're confusing this mailing list for a list that is there for
supporting Moorestown software design /support issues.
This list is not for that.... you really should contact your Intel
representative for those support questions, he can help you get the
right assistance for your problem.
(This is not the first time we've said that here... please make sure
that all your coworkers also know this)
_______________________________________________
MeeGo-dev mailing list
[email protected]
http://lists.meego.com/listinfo/meego-dev
http://wiki.meego.com/Mailing_list_guidelines
