Andrew Peters wrote:
> the fron tf the yellow(71) and blue(70)have been crashed, they measured 800
> and 790 from fire wall to front lip of rad support pannel, the white(71)
> hasnt been crashed and is 790, so i dont know, we didnt try different
> latches, maybe thats the go, what should the distance be??
My '70 non stacked measured 790 mm.
>
> another thing i noticed was on both 71's the holes on either side of the
> radiator are different shapes, one has round holes, the other triangles,
> anyone know what the go there is???
Mine has oval holes at the top and round holes at the bottom. My '72 factory
a/cond that i used to have installed used these holes for the condenser pipes
and it fitted perfectly, I hope an inter cooler is a easy to plumb.
regards
Terry
>
> thanks
> andrew
> -----Original Message-----
> From: Albs <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Sunday, 30 April 2000 16:59
> Subject: Re: bonnets
>
> >has the front of car been in a prang? measure the distance between the fire
> >wall and the end of the front engine bay rail between the cars to see if
> >any difference or is the difference in the bonnets? maybe malcome could
> >shed some light on if there was part number difference between bonnets on
> >the different years of builds.
> >
> >
> >
> >
> >> any ideas anyone????
> >>
> >> -----Original Message-----
> >>From: Andrew Peters <[EMAIL PROTECTED]>
> >>To: [EMAIL PROTECTED]
> <[EMAIL PROTECTED]>
> >>Date: Saturday, 29 April 2000 0:34
> >>Subject: bonnets
> >>
> >> hi all, a quick question that is giving me the shits, we
> >>have 3 good bonnets, all from late models, 2 other bonnets, i which
> >>was bent in an accident, and the other is fibreglass. the bent 1 was
> >>on a 70, and the f/g on a 71, then after the stack the f/g went on to the
> >>70 without a prob. the problem is the 3 good bonnets (all exactly the
> >>same) dont fit these cars, yet they fit my other 71. the problem is
> >>the latch is too far foreward on the good bonnets relative to the
> >>latch lock on the 70 and 71??? this is very confusing i know but
> >>what is the go with same model cars having different bonnets, and is
> >>the go to just move the latch lock foreward to fit them?? thanks
> >>andrew
> >>--membersozdat-------------------------------------------------------
> >>OZDAT Mailing List Please Note:-
> >>Send (un)subscribe requests to [EMAIL PROTECTED]
> >>Send submissions to [EMAIL PROTECTED]
> >>No unauthorised redistribution of this email
> >>http://www.datascribe.com.au/ozdatonline/index.htm
> >>http://www.datascribe.com.au/ozdatonline/listindex.html
> >>---------------------------------------------------------------------
> >>
> >>
> >
> >
> >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
