thanks terry
-----Original Message-----
From: Terry & Heather <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Sunday, 30 April 2000 18:27
Subject: Re: bonnets
>
>
>Andrew Peters wrote:
>
>> the fron tf the yellow(71) and blue(70)have been crashed, they measured
800
>> and 790 from fire wall to front lip of rad support pannel, the white(71)
>> hasnt been crashed and is 790, so i dont know, we didnt try different
>> latches, maybe thats the go, what should the distance be??
>
>My '70 non stacked measured 790 mm.
>
>>
>> another thing i noticed was on both 71's the holes on either side of the
>> radiator are different shapes, one has round holes, the other triangles,
>> anyone know what the go there is???
>
>Mine has oval holes at the top and round holes at the bottom. My '72
factory
>a/cond that i used to have installed used these holes for the condenser
pipes
>and it fitted perfectly, I hope an inter cooler is a easy to plumb.
>
>regards
>Terry
>
>>
>> thanks
>> andrew
>> -----Original Message-----
>> From: Albs <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Sunday, 30 April 2000 16:59
>> Subject: Re: bonnets
>>
>> >has the front of car been in a prang? measure the distance between the
fire
>> >wall and the end of the front engine bay rail between the cars to see if
>> >any difference or is the difference in the bonnets? maybe malcome could
>> >shed some light on if there was part number difference between bonnets
on
>> >the different years of builds.
>> >
>> >
>> >
>> >
>> >> any ideas anyone????
>> >>
>> >> -----Original Message-----
>> >>From: Andrew Peters <[EMAIL PROTECTED]>
>> >>To: [EMAIL PROTECTED]
>> <[EMAIL PROTECTED]>
>> >>Date: Saturday, 29 April 2000 0:34
>> >>Subject: bonnets
>> >>
>> >> hi all, a quick question that is giving me the shits, we
>> >>have 3 good bonnets, all from late models, 2 other bonnets, i
which
>> >>was bent in an accident, and the other is fibreglass. the bent 1 was
>> >>on a 70, and the f/g on a 71, then after the stack the f/g went on to
the
>> >>70 without a prob. the problem is the 3 good bonnets (all exactly
the
>> >>same) dont fit these cars, yet they fit my other 71. the problem
is
>> >>the latch is too far foreward on the good bonnets relative to the
>> >>latch lock on the 70 and 71??? this is very confusing i know
but
>> >>what is the go with same model cars having different bonnets, and
is
>> >>the go to just move the latch lock foreward to fit them??
thanks
>> >>andrew
>> >>--membersozdat-------------------------------------------------------
>> >>OZDAT Mailing List Please Note:-
>> >>Send (un)subscribe requests to [EMAIL PROTECTED]
>> >>Send submissions to [EMAIL PROTECTED]
>> >>No unauthorised redistribution of this email
>> >>http://www.datascribe.com.au/ozdatonline/index.htm
>> >>http://www.datascribe.com.au/ozdatonline/listindex.html
>> >>---------------------------------------------------------------------
>> >>
>> >>
>> >
>> >
>> >
>> >
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
