I have looked at the Z32's, and wouldn't mind adapting them on but I think I
would need 15's and a special offset???
Once again mybe you can advise Errol, as I havent taken any measurements
Brad HALLETT
Ipswich, Qld
----- Original Message -----
From: "Errol Smith" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, May 16, 2000 9:21 PM
Subject: Re: Sumitomo Calipers for a 1600 ???
> Brad
> The Sumitomo's are cast iron. but not as heavy as Hilux cast, Volvo, or
> Landcruiser. I do not know of any alloy four spots that will fit the 240K
> struts without making up dog bones to adapt them! The VT calipers are good
> compromise. If you really want a good alloy four spot then Z32 300ZX alloy
> 4 Piston (spot, pot) calipers mounted on GTS skyline struts and discs are
> the top setup! This combination weighs about the same as a stock stanza
> 240K strut and brake setup!.
> Cheers
> Feral Errol
> ----------
> > From: Brad HALLETT <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: Re: Sumitomo Calipers for a 1600 ???
> > Date: Tuesday, May 16, 2000 8:08
> >
> > Are they alloy or cast Errol? What alloy 4 pots are around that will
bolt
> > onto 240K struts? I am looking at VT Commodore alloy twin pots but if
> there
> > is a simple 4 pot solution I will go for that.
> > Brad HALLETT
> > Ipswich, Qld
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
