I'm yet to work out which hoses to use from the FJ to the N13 radiator, but
when I had the L18 in with the N13 rad I used the ordinary L series bottom
hose, with a joiner connected to a Ca20 gazelle bottom hose. This curled
down under the sump across to the bottom n13 radiator connection. The top
hose was a combo of an L series top and an old bit from the gazelle radiator
hose I had, it wasn't a perfect fit. I'm sure a quick perusal at Auto-one
etc would find a better unit.
Hope this helps,
Wardy
----- Original Message -----
From: "Terry & Heather" <[EMAIL PROTECTED]>
To: "Ozdat" <[EMAIL PROTECTED]>
Sent: Monday, May 22, 2000 12:34 PM
Subject: RE: Radiator hoses
> Trev,
> The FJ20 engine has the inlet on the driver's side and the outlet
> on the passenger side. The N13 radiator that is used for the FJ
> has opposing outlets, the top rail is reversed and the top fitting
> tags are removed. Two holes are drilled for the locating pegs on
> the bottom of the radiator and the Pulsar external fan mounting
> holes are used to locate the top rail to the 510 bonnet x bar. The
> original Pulsar fans are not generally used as the mounting points
> are all a-about if you fit the radiator in the manner I have
> described. I would use a single 10-12" sucking through on the
> passenger side, and this should be ample for a 200B as the FJ
> pumps plenty of heat which the alloy Pulsar radiator holds the
> temperature very well.
>
> I used an Urvan bottom and some sort of Camira top but Wardy has
> just done this using a completely different combination. He has
> also done a L series with the N13 so he will prolly respond to
> this when he reads it.
>
> Universal hoses have been used by some, i reckon they're bulk ugly
> but they work OK.
>
> regards,
> --
> Terry
>
> Forwarded Message:
> > To: "'[EMAIL PROTECTED]'"
> <[EMAIL PROTECTED]>
> > From: "Pooley, Trevor" <[EMAIL PROTECTED]>
> > Subject: Unspecified
> > Date: Mon, 22 May 2000 10:57:34 +0930
> > -----
> > Terry,
> >
> > N13 Pulsar alloy radiator 2nd hand $100 - $125, new $250 -
> $300=20
> >
> > Does the FJ have its water hoses on the same side of the motor?
> What I mean
> > is I have seen two types of N13? radiators. One has hoses on the
> same side,
> > The other on opposite sides (I have one of these). Does the nice
> looking
> > twin thermo fan setup that comes with these rads fit with the
> FJ. I have
> > found it difficult to fit with an L20B.
> >
> > Also does anyone know what hoses can be used/ adapted for the
> FJ, N13 rad
> > setup?
> > Also does anyone know what hoses can be used/ adapted for the
> L20B, N13 rad
> > setup?
> > Alternatly should I just buy those universal types?
> >
> > Thanks
> > Trev
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
