thanks for all that info
came in very handy
put all the info into Desktop Dyno and was very suprised at how accurate it
is
the workshop manual says 110hp@6200
Desktop Dyno 2000 says 115hp@6400
so it's pretty accurate
and according to it my L16 is putting out around 151hp@7100 so my 120Y
should be pretty quick when it's all together :)
-----Original Message-----
From: Craig Overend <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Sunday, 23 July 2000 6:56
Subject: Re: L16 Stanza specs
>David,
>
>I used this information in a program like Desktop Dyno2000 that I am
>currently writing.
>I have verified this info as I have an '82 Stanza PA10 W53 peanut head
>with a 'B' cam and I measured it. The specs I have are as follows:
>
>Stanza (A10) L16 110hp@6200rpm, 99.8ft/lb@4000rpm
>bore 83mm
>stroke 73.7mm
>133mm rod length
>38.1mm piston pin height
>207.8mm block height
>1595cc
>8.5:1 CR
>No Idea of carbie flow(I will be flow testing SU's and a 45mm Weber
>sometime)
>42mm inlet valves
>38mm internal seat diameter
>31.5mm intake ports
>35mm exhaust valves
>30mm internal seat diameter
>10.5mm valve lift (both)
>240deg intake duration
>248deg exhaust duration
>intake opens 12deg BTDC
>intake closes 48deg ABDC
>exhaust opens 54deg BBDC
>exhaust closes 14deg ATDC
>
>regards,
>Craig.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
