Terry,
They had the R180 in them (as you pointed out 4.375 - 5.1:1 ) depending on
engine spec and year of manufacture. The LSD was always in the H190 rear
axle never in the R180.
Cheers
Feral Errol
----------
From: Terry & Heather <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: RE: LSD diffs & camber for 200B struts
Date: Sunday, August 06, 2000 1:51
The 720 utes with the LSDs (front is a R180? 4.5-5.1 Errol am I correct
here? or did they have a solid front axle as well?) had a 4x4 badge on
them.
They are scarce at the wreckers so maybe they're still on the road.
terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Errol Smith
Sent: Saturday, 5 August 2000 7:44 PM
To: [EMAIL PROTECTED]
Subject: Re: LSD diffs & camber for 200B struts
The 720 utes were often fitted with H190 LSD's and Telstra Bluebird wagons
often got LSD's in country areas.
Cheers
Feral Errol
----------
From: M & J Pacey <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: LSD diffs & camber for 200B struts
Date: Sunday, August 06, 2000 12:25
Errol were any of the nissan comercials fitted with a LSD centre to suit
the
H190 if so do you know what models i have a 620 ute centre i am fitting to
my 1200 coupe
-----Original Message-----
From: Errol Smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Saturday, August 05, 2000 2:25 AM
Subject: Re: LSD diffs & camber for 200B struts
>Davo,
>The wagon diff is an H190 (small axle model 24mm diam 23 teeth spline)
>These diffs are good for 200hp applied carefully. If you want to giver it
a
>flogging you could always put in a larger spline centre and modify some
>other axles to suit the length and bearing housing. Maybe a 620 ute diff
>may be a go then machine the axles flanges down and redrill the flange to
>suit 4 stud 114.3 mm pitch circle rims. (See threads in archives?)
Slippery
>centre for H190's are easier to get than H165's and are usually cheaper
and
>in better condition.
>Cheers
>Feral Errol
>
>From: Davo <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: LSD diffs & camber for 200B struts
>Date: Saturday, August 05, 2000 5:31
>
>I was just cleaning up a 1600 wagon diff and i know the ratio's is 3.7.
Im
>guessing these have the same range of LSD as the 1200 ute diff?? The 1600
>wagon diff is H190 right?? i couldn't find any marks on the outside so i
>not
>100% sure.
>
>Scott
>Davo
>
>-----Original Message-----
>From: Errol Smith <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>Date: Friday, 4 August 2000 9:40
>Subject: Re: LSD diffs & camber for 200B struts
>
>
>>Rob,
>>The best bet may be to fit the 1200 ute housing and get a stanza 3.7 and
>>put the LSD centre into that. If you want to go H190 use a 1600 wagon
>>housing and fit an H190 3.7 from a Bluebird wagon, 280C or similar.
>>Slippery centres for these are reasonably easy to get for $1000 or so.
>>Cheers
>>Feral Errol
>>----------
>>From: Robert Marshall <[EMAIL PROTECTED]>
>>To: [EMAIL PROTECTED]
>>Subject: LSD diffs & camber for 200B struts
>>Date: Friday, August 04, 2000 12:44
>>
>>I have 2 issues to deal with in order finish my project.
>>
>>1st - choosing an appropriate limited slip diff.
>>
>>2nd - Working out how to get the camber right with 200B struts.
>>
>>I have a 120Y 4-door, soon to be converted to 2-door, with a
>>heavily worked CA18DE motor.
>>
>>First issue is choosing a LSD for it. For now i am going for a Nissan
>>Vanette (or C20) limited slip diff; I'll have to shorten it unless i use
>>the
>>Datsun Roadstar Ute diff carrier/housing and put the LSD case from the
>>Vanette into the Ute diff carrier.
>>Have i got any other options on the LSD drama, as i would prefer taller
>>final gear ratios; at present i would be stuck with 4.1:1, and I really
>>want
>>more top end speed.
>>
>>Second issue is the 200B struts that i have sucessfully put on to my car.
>>They will do the business, as long as i can measure or work out how to
>>adjust up the camber. As they are the camber is wrong.
>>
>>
>>Any help appreciated,
>>Cheers Rob.
>>________________________________________________________________________
>>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>>
>>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
