Terry that should read 1973.(for the C110)
The 1963ish Skyline I have looked under had a IRS type rear end I think
thats called a dion or someting.
Malcolm
Terry & Heather wrote:
>
> All of them since the 240K/C110/Skyline GT in 1974, that is there is an IRS
> version of every Skyline made. In Australia the locally produced R31 was the
> odd one out with a live axle, but the Japanese R31 RB25 RS-X and GT-R were
> IRS in the Coupe versions.
>
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Julian
> Sent: Saturday, 2 September 2000 6:59 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Changing rear arms...Re: Rear Toe In.
>
> Which skylines are IRS? any pre 1980?
>
> - Julian
>
> Adam wrote:
>
> > I have a 1600. There are no wreckers with 1600's left in Townsville, only
> > 180B and IRS skyline's from 1970 onwards.
> > At 12:48 1/09/00 +1000, you wrote:
> > >Adam,
> > >What sort of car is it? Cant you get an arm from the same car?
> > >Cheers
> > >Feral Errol
> > >
> > >----------
> > >From: Adam <[EMAIL PROTECTED]>
> > >To: [EMAIL PROTECTED]
> > >Subject: Changing rear arms...Re: Rear Toe In.
> > >Date: Friday, September 01, 2000 10:08
> > >
> > >So what other cars use the same swing arm? 180B and 1600, aren't the
> 6cyls
> > >
> > >a different size?
> > >
> > >At 08:38 1/09/00 +1000, you wrote:
> > > >Adam,
> > > >small bends are hard to see and can easily give 5mm toe. The only way
> to
> > > >check is to remove the arm and compare with an arm that is known to be
> > >good
> > > >Cheers
> > > >Feral Errol
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
