All skylines (C210's +) from 1972 to 1984 have trailing arms that will bolt
on to your 1600 rear crossmember. Not all the trailing arms will have the
right design to fit your rear springs. They stopped at 1978/9 and Nissan
then used coil over shockers.
----- Original Message -----
From: "Julian" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, 2 September 2000 18:59 PM
Subject: Re: Changing rear arms...Re: Rear Toe In.
> Which skylines are IRS? any pre 1980?
>
> - Julian
>
> Adam wrote:
>
> > I have a 1600. There are no wreckers with 1600's left in Townsville,
only
> > 180B and IRS skyline's from 1970 onwards.
> > At 12:48 1/09/00 +1000, you wrote:
> > >Adam,
> > >What sort of car is it? Cant you get an arm from the same car?
> > >Cheers
> > >Feral Errol
> > >
> > >----------
> > >From: Adam <[EMAIL PROTECTED]>
> > >To: [EMAIL PROTECTED]
> > >Subject: Changing rear arms...Re: Rear Toe In.
> > >Date: Friday, September 01, 2000 10:08
> > >
> > >So what other cars use the same swing arm? 180B and 1600, aren't the
6cyls
> > >
> > >a different size?
> > >
> > >At 08:38 1/09/00 +1000, you wrote:
> > > >Adam,
> > > >small bends are hard to see and can easily give 5mm toe. The only way
to
> > > >check is to remove the arm and compare with an arm that is known to
be
> > >good
> > > >Cheers
> > > >Feral Errol
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
