|
$300 should get you a sizzling second hand head
with big valves and probably another good cam. Bolt it on, fit the carbs
and off you go!
To save fuel, simply lift the right
foot.
----- Original Message -----
Sent: Friday, 22 September 2000 13:01
PM
Subject: Cylinder heads
Hi
listers
I blew my head gasket on Wednesday, and have
decided to warm the L18 up a bit while it's in bits. (will also get
the mystery cam setup too, and if Zac gets his bum into gear a 45 weber
too! :)
Theres one problem though... the head is
stuffed due to corrosion (and my spare one too... which is a bit of bad
luck). I've been reading bout A87, peanut, etc heads, I don't really
know which kind suits my needs best, but I was wondering if anybody had
something in decent nick for sale? It's going to be a mild street car,
nothing too serious. I don't want huge valves etc cos I wanna keep fuel
consumption reasonable, and would be happy with something already worked on as
long as it was fairly mild :) Who would I be best off talking
to about working one of these heads here in Adelaide? I wouldn't want to
spend much more than $350 on modifying the head.
Thanks
-
Tom
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
