Chris, I had to give you some stuff, what was it again? I think it was the
gasket kit for the L20 if I remember right. Did I give you the head gaskets?
I forget... I also have the rocker cover off that motor if you are still
persisting with it.. If not, I'll chuck it.

That cluster I got off you was ok, even the clock works 100%. Only thing is
the fuel gauge is intermittant. Bummer eh!


Steve, I live in the Blue Mountains, so where do you wanna meet?  Maybe we
could all come to your place and put your car back together in the morning
and then go for a kroooz later on... :)

Chris is in Ryde or somewhere. Maybe meet near eastern creek somewhere?!? Or
even on Richmond road, back of Blacktown or somewhere like that. Richmond is
not far for me, so it's a spit to Blacktown from richmond.

Anybody need any parts while I'm at it. I've got:
Series 2 bluebird front crossmember, sway bar to suit.
L20 Trx 5 speed gearbox, filthy but working fine, just needs a speedo cog
inserted in the hole.
I've got a 3speed auto from a 180b going REAL cheap... :)
3 x standard L20 style carbys, 1 manifold to suit
I have a 228 holley on a L series manifold with adaptor plate. This would be
a great bolt-on replacement for a standard carby on a smaller engine, I had
it on a 2lt and it went good! It has a cable linkage setup.
SR20 standard ECU & 3/4 of a loom to suit.. :)


It's all up for grabs so if you want any of it, make a good offer and I can
bring it with me.




> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Steve Taylor
> Sent: Tuesday, 26 September 2000 2:04 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Geordie
>
>
> My phone number is one of these orange phone things, me and Sime
> both live in
> the dundas/carlo area. Not sure if my 16 will be up and running
> by monday (new
> head and stuff going onto it) but would still love to go for a run in your
> beast. Where you live Chris?
> Let us know
> Steve.
>
> Geordie Smith wrote:
>
> > We can probably arrange a krooz for monday if you want, we can all meet
> > somewhere near there & swap cars. :)
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED]]On Behalf Of uniken
> > > Sent: Monday, 25 September 2000 11:43 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: RE: Geordie
> > >
> > >
> > > me too me too, I'm only 5 minutes from Carlingford :)
> > >
> > > 0438303512
> > >
> > > Cheers,
> > >
> > > Chris Howard
> > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED]
> > > > [mailto:[EMAIL PROTECTED]]On Behalf Of
> steven taylor
> > > > Sent: Monday, September 25, 2000 11:01 PM
> > > > To: [EMAIL PROTECTED]
> > > > Subject: Re: Geordie
> > > >
> > > >
> > > > Geordie,
> > > > Good to hear some prob's are solved! Yeah i live in Sydney, near
> > > > Carlingford,
> > > > and would love to go for a spin to compare to the old school
> > > > z18's get up and
> > > > go! Ring me anytime on 0245224043.
> > > > Cheers
> > > > Steve. (p.s i think Sime meant hed love to come aswell as he only
> > > > lives a couple
> > > > of hundred meters from me, ring us!)
> > > >
> > > > Geordie Smith wrote:
> > > >
> > > > > Me too what?  Sorry I don't quite understand.
> > > > >
> > > > > Perfect drifter mobile... :)
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: [EMAIL PROTECTED]
> > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of simon
> > > > > > waterhouse
> > > > > > Sent: Monday, 25 September 2000 11:48 PM
> > > > > > To: [EMAIL PROTECTED]
> > > > > > Subject: RE: Geordie
> > > > > >
> > > > > >
> > > > > > me tooo...???
> > > > > > not in the wet though :)
> > > > > > Simon
> > > > > >
> > > > > >
> > > > > > >From: "Geordie Smith" <[EMAIL PROTECTED]>
> > > > > > >Reply-To: [EMAIL PROTECTED]
> > > > > > >To: <[EMAIL PROTECTED]>
> > > > > > >Subject: RE: Geordie
> > > > > > >Date: Mon, 25 Sep 2000 09:15:14 +1000
> > > > > > >
> > > > > > >Runs quite well. Dyno saw 135hp at 7psi at 4000rpm, but it was
> > > > > > pinging too
> > > > > > >much on standard ulp and bad oil so the dyno was stopped.
> > > Have since
> > > > > > >changed
> > > > > > >the oil to mobil 1 and am now running pulp. Now it
> hits 4000 and
> > > > > > >immediately
> > > > > > >jumps to 8000 and revs the tacho needle off the clock, no
> > > ping. It is
> > > > > > >absolutely bullshit in the wet I found out this morning.
> > > Rain = drive
> > > > > > ><4000rpm or else you find yourself pointing in the wrong
> > > > direction with
> > > > > > >speedo bouncing around from 30km/h to 130km/h and no steering.
> > > > > > >
> > > > > > >Where do you live, I'll take you for a spin if your in Sydney.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: [EMAIL PROTECTED]
> > > > > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > > > > steven taylor
> > > > > > > > Sent: Monday, 25 September 2000 3:13 AM
> > > > > > > > To: ozdat
> > > > > > > > Subject: Geordie
> > > > > > > >
> > > > > > > >
> > > > > > > > Geordie,
> > > > > > > > Ive just got back from Indo and was trying to see how the
> > > > SR dynoed up
> > > > > > > > while i was away, any figures??????? Maybe i missed your
> > > > > > post, hows she
> > > > > > > > progressing??
> > > > > > > > Cheers
> > > > > > > > Steve.
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > >
> > >
> _________________________________________________________________________
> > > > > > Get Your Private, Free E-mail from MSN Hotmail at
> > > http://www.hotmail.com.
> > > > >
> > > > > Share information about yourself, create your own public
> profile at
> > > > > http://profiles.msn.com.
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> >
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to