> I hvae heard they were fitted as a factory recall, but then one wrecker
> told me they were on one certain year.
> It's not that hard to spot them. Take a measuring tape so you can
> measure from the centre bolt to the outside ones. If these are uneven
> then you have offset!
> I found one set with the offset bolt set to the front hole and on the
> other side it was set to the inner hole!?

Zac,
That's what i was telling you about earlier - it's likely that the 180B had .5 
pos one side and 1 pos the other and so after they fitted 5mm offsets it would 
be zero both sides (in theory).

terry

>   ----- Original Message ----- 
>   From: Daniel Kroehn 
>   To: [EMAIL PROTECTED] 
>   Sent: Tuesday, November 07, 2000 5:00 PM
>   Subject: Re: Offset strut tops
> 
> 
>   Alright Zac, I'll  have a look next time I go (in the next week
> probably), If I turn up nothing I'll give you a yell.  Just one
> question, do they come off a special model of 180B or are they found on
> all 180B's?
> 
>   Daniel Kroehn
>     ----- Original Message ----- 
>     From: Zac Campbell 
>     To: Ozdat 
>     Sent: Tuesday, November 07, 2000 4:04 PM
>     Subject: Offset strut tops
> 
> 
>     We went to the wreckers today and found heaps of offset strut tops.
> There appears to be two types, one with more offset than the other. The
> one with less offset is more common. I would be seriously surprised if
> you couldn't find a set at a wrecker near you..
> 
>     zac
> 
>    
> --membersozdat------------------------------------------------------- 
>     OZDAT Mailing List Please Note:- 
>     Send (un)subscribe requests to [EMAIL PROTECTED] 
>     Send submissions to [EMAIL PROTECTED] 
>     No unauthorised redistribution of this email 
>     http://www.ozdat.com/ozdatonline/index.htm 
>     http://www.ozdat.com/ozdatonline/listindex.html 
>     http://www.mail-archive.com/[email protected]/ 
>    
> ---------------------------------------------------------------------
> 
>   --membersozdat------------------------------------------------------- 
>   OZDAT Mailing List Please Note:- 
>   Send (un)subscribe requests to [EMAIL PROTECTED] 
>   Send submissions to [EMAIL PROTECTED] 
>   No unauthorised redistribution of this email 
>   http://www.ozdat.com/ozdatonline/index.htm 
>   http://www.ozdat.com/ozdatonline/listindex.html 
>   http://www.mail-archive.com/[email protected]/ 
>   ---------------------------------------------------------------------
> 
---------------------------------------------------------------------


----------------------------------------------------------------
This message was sent using Dynamite Internet's Web Mail System.
http://home.dynamite.com.au/


Reply via email to