No problems, just wish I could afford them!! :)
zac
----- Original Message -----
From: Errol Smith <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 21, 2000 9:32 PM
Subject: Re: 4-spot calipers and the X offset required
> Zac,
> I have one set of these struts. They are R31 GTS fitted with large shaft
> Bilstein inserts and adjustable platforms.
> This is not intended to cause confusion but obviously is. I apologise for
> any inconvenience.
> Cheers
> Feral Errol
> WWW.Datrats.com.au
>
> ----------
> From: Zac Campbell <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: 4-spot calipers and the X offset required
> Date: Tuesday, November 21, 2000 21:50
>
> Errol, you make it sound like two different struts but you mean one!
> > The struts are GTS Skyline with DBA's
> and
> > The adjustable platform struts are the Bilstein large shaft units
> mentioned in the suspension page
>
> later,
> zac
>
> ----- Original Message -----
> From: Errol Smith <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, November 21, 2000 8:21 PM
> Subject: Re: 4-spot calipers and the X offset required
>
>
> > Zac,
> > Have you refreshed the pages lately as I have no mention of custom
struts
> > on my current site. The struts shown in the pics are R31 GTS fitted with
> > adjustable platforms. This is the only custom part of the struts. If
you
> > use the standard spring platforms these brakes can still be used. 70mm
is
> > larger than most X offsets. Typically the rims I have range from 15mm to
> > 45mm.
> > Cheers
> > Feral Errol
> > WWW.Datrats.com.au
> >
> > ----------
> > From: Zac Campbell <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: Re: 4-spot calipers and the X offset required
> > Date: Tuesday, November 21, 2000 11:51
> >
> > But Errol, the pictures you have on your site use a custom strut? You do
> > write that it is compatible with both.
> > Is 70mm X-offset big for a 15" rim? I noticed that you struggled to get
> > 65mm
> > on some 15", thats why I thought mine was unusual to get 70mm quite
> easily.
> >
> > cheers,
> > zac
> >
> > ----- Original Message -----
> > From: Errol Smith <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, November 21, 2000 6:50 AM
> > Subject: Re: 4-spot calipers and the X offset required
> >
> >
> > > Zac,
> > > The struts I use are R31 GTS. not a custom strut. The X offset is the
> > > distance from the flange the wheel sits against on the hub to the
inner
> > > points of the spokes where the caliper would hit the wheel. You are
> quite
> > > correct that a 15 is the minimum diameter rim.
> > >
> > > Also this strut/Hub combination moves your front wheels out some 25mm
> > from
> > > its stock position which is why I dont have then fitted to my road
> going
> > > Sunny (KB310). The flares would have to be awesome.
> > >
> > > The same setup fitted to dog bones on 200B/240K struts as Stewart
> Wilkins
> > > has done would be best IMHO.
> > >
> > > Cheers
> > > Feral Errol
> > > WWW.Datrats.com.au
> > >
> > > ----------
> > > From: Zac Campbell <[EMAIL PROTECTED]>
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: 4-spot calipers and the X offset required
> > > Date: Monday, November 20, 2000 23:05
> > >
> > > Errol uses some crazy custom struts he has or R31GTS struts.
> > > I'm not quite sure what he means by this X-offset. I measured my wheel
> > how
> > > he suggested to me and it had ~70mm offset. It is a 15" wheel. 15
would
> > > have
> > > to be minimum.
> > > Also I am not sure about fitting these brakes to a 1600 strut, but I
> > don't
> > > think you would do that. Noone seems to use those struts for anything
> > > performance. 200b/240k are more commonly used. It might be that you
> would
> > > be
> > > stressing the stock 1600 wheel bearings with 15" wheels.
> > >
> > > zac
> > >
> > > ----- Original Message -----
> > > From: David Andrews <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Monday, November 20, 2000 9:09 PM
> > > Subject: 4-spot calipers and the X offset required
> > >
> > >
> > > > G'day all,
> > > >
> > > > If I use the 4-spot calipers from a Z32/S14/R3? on my original 1600
> > > struts
> > > > then will I require wheels with a 65mm (+?) X offset? (getting this
> > from
> > > > errols site with the same calipers on bluebird (i think) struts) or
> is
> > it
> > > > different for the 510 strut? Thanks
> > > >
> > > > Dave
> > > >
> > > >
> > >
> > >
> > >
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
