I have just finished upgrading my fuel lines for the Z18ET. I used 7.94 OD
bundy weld tube for both go and return. It costs about $1 a meter and you
need about 6 metres.
You can bend it easily but to avoid kinking you should use some sort of
pipe bender. An 8mm fuel hose will fit straight over the tube and costs
about $6/m and you will need about 3-4 metres depending on the surge tank
and where the filters are. Most of the cost will be labour as it takes a
bit of time 1-2 hours to bend the pipe and secure it so a workshop will
probably charge $150-$200. Doing it yourself will cost about $30 or $60 if
you buy the pipe bender.
At 07:55 PM 6/12/2000 +1100, you wrote:
>Guys I am purchasing an EFI setup for my L20 in my 1600 and figure I will
>have to upgrade my fuel line and add a return line as I don't have one.
>What size, type do I use, can I do this my self? how much would it cost
>for a shop to do it?? Has anyone else done this I guess so as of
>fj/sr/z18 would require this modification. Any help muchly appreciated
>Ryan
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
