Check your earth leads, particularly chassis to battery, and make sure your
fuel tank is earthed out too. Hope this helps
Cya
Wardy
----- Original Message -----
From: "Bruce Ferguson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, December 06, 2000 10:51 PM
Subject: Elect Gremlins
> List,
>
> OK here is the rub...... Temp and fuel guauges are not
> working.
>
> Removed the guages, used wet&dry to clean the
> regulator points at the rear of the guage unit, tested
> them on the bench (earthing out) and both work fine.
>
> Installed them and still not working, earthed out the
> sender wires from both the fuel tank and temp sender
> unit.. both guages register no probs.
>
> Replaced the temp sender, still no response, used a
> spare fuel tank sender unit to test the guage (outside
> of the tank) still no response.
>
> Has anyone come across this problem and if so, the fix
> ?????
>
> I really dont want to fit an after market fuel guage,
> although I do have one for the water temp (the datto
> ones were never very accurate)
>
> Cheers
>
> Bruce
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
