Errol have found out a little more it has a T3 exhaust flange and turbo shop confirmed it has a T3 core by Id tag only problem is noone knows the specs of it as Nissan fit there own housings -----Original Message----- From: Errol Smith <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Thursday, November 30, 2000 4:53 AM Subject: Re: Turbo >Mark, >Sounds like a T25 or T28 but with a bigger A/R (0.89) exhaust housing??? >I assume its water cooled? and it also sounds like a T25 with the 3 bolt >compressor outlet. >I may be wrong though! >Cheers >Feral Errol >www.Datrats.com.au > >---------- >From: M & J Pacey <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: Turbo >Date: Friday, December 01, 2000 14:40 > >Errol this is the problem as there is minimal markings the only thing is on >the exhaust housing it looks like 0.89it has a 4 bolt exhaust flange with a >3 bolt outlet flange on the compressor it has a 50mm inlet to compressor >and >a 40 mm outlet on the exhaust . Mark >-----Original Message----- >From: Errol Smith <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> >Date: Wednesday, November 29, 2000 3:47 AM >Subject: Re: Turbo > > >>Mark, >>What is the A/R ratio of the compressor and the exhaust housings? >>Is it water cooled? >>What types of flanges on inlet and exhaust? >>External wastegate or internal? >>Cheers >>Feral Errol >>www.Datrats.com.au >> >>---------- >>From: M & J Pacey <[EMAIL PROTECTED]> >>To: [EMAIL PROTECTED] >>Subject: Turbo >>Date: Thursday, November 30, 2000 13:48 >> >>Errol i am hoping you can help me identify a turbo i have it is a Garrett >>NISSAN the compressor snail has the no's 17V cast into it ,the tag on the >>bearing housing is QA 1105J >>114420-17VOI >>444321-1 >>I am hoping you might know the specs and what it came off of >>-----Original Message----- >>From: Errol Smith <[EMAIL PROTECTED]> >>To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> >>Date: Monday, November 27, 2000 9:27 PM >>Subject: Re: L24 rods >> >> >>>It should have the bigger bolts >>>Cheers >>>Feral Errol >>>www.Datrats.com.au >>> >>>---------- >>>From: andrew smith <[EMAIL PROTECTED]> >>>To: [EMAIL PROTECTED] >>>Subject: L24 rods >>>Date: Tuesday, November 28, 2000 10:51 >>> >>>I was looking around for a set of L16 rods and came across an efi L24 >>>motor.Can anyone tell me if these have 9mm rod bolts. The guy said I >>>could have it for free but I only want it if they have the larger rod >>>bolts as I've got enough junk now.Any help would be great. >>>Andrew Smith >>> >>> >> >> > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
