Hi Craig I havnt seen the new Zoom mag yet is it any good?? The flywheel
bolts didn't brake they just stretched and came loose causing quite a
nasty vibration, also damaging both flywheel and crank. On the way home
the gearbox exploded :( tearing all the input and cluster teeth off. I
now have a solid steel flywheel doweled & had to get crank machined :(
While it was apart I had it dynamic balanced making engine even smoother
than before. I used to like the red car with white flares too but as its
white now its not quite as obvious so I can suck a few victims in at the
lights. Since the photo shoot I have fitted a new rising rate fuel
pressure reg and 400hp Ball bearing turbo I have not had it on dyno but
runs very hard with 20psi. I will have the new turbo extractors made and
fitted in time for summernats this year and hope to get some serious HP
at 15psi (around 250-260 I hoping for)
Cya Andrew
Craig Overend wrote:
> Just read of Andrew Dennis's CA18DET 1200 in the current ZOOM.
> If Andrew is still on the list what happened when the flywheel bolts
> broke? What got destroyed?
> BTW I preferred it in red! It was easier to pick as your car with the
> white flared guards :)
>
> Craig.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
