does anyone know of any engine builders in the Brisbane area that specialise
in or just know datsun engines really well?
also Andrew do you know around about how much a stroked A12 like that would
cost? I'm looking for ways to get a bit more from my daily driver
120Y...I'll probably stick with an L series conversion but depending on
price that a12 stroker sounds interesting and would save me having to get
mods plates.
Dave
----- Original Message -----
From: "Andrew Denniss" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, January 19, 2001 6:08 PM
Subject: Re: A12
> Hey James My engine builder-Fixer can fix this problem for you he strokes
the A12
> with a A14 crank and bored to get nearly 1500cc if you want to spend the
money its
> possible to get 150+hp from this :) Give jeff a ring JTS 02-96238826 he
is a good
> bloke and can probably do one too a budget.
> Cheers Andrew
>
> James & Chirryl wrote:
>
> > The reason for using the A12 block is to avoid getting an engineers
> > certificate, since the engine is to replace an A10 (988cc). Though now
it
> > seems a better idea to do it properly, and get some disk brakes, an
> > engineers certificate and use an A14/15.
> >
> > > I dont know the exact figure but i know the A14/15 can be bored max
140thou.
> > > The bore on the A12 is 73mm and A14/15 76mm. So theres allready
approx
> > > 120thou difference between blocks. So as a guess, around 200 thou???
Maybe
> > > more? But i see no point boring a A12 block as the deck height is
15mm
> > > shorter than the A14/15 giving a lower overall capacity. Maybe
someone else
> > > has an exact figure...
> > >
> > > Scott
> > > Davo
> > >
> > > -----Original Message-----
> > > From: James & Chirryl <[EMAIL PROTECTED]>
> > > To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> > > Date: Thursday, 18 January, 2001 15:42
> > > Subject: Re: Drag racing pics
> > >
> > >
> > >>
> > >> gday list,
> > >> Does anyone know how far an A12 block can be safely bored out to?
there
> > >> seems to be a fair bit of meat between the cylinders . But I don't
think
> > > it
> > >> would have been done before, as most poeple use an A14\15 block as a
> > >> starting point.
> > >>
> > >> thanks,
> > >>
> > >> James.
> > >>
> > >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
