Tom,
I'd put in four new inlet plugs. And have a go. Have you some other plug &
coil leads you could put on after that if it still doesnt go.
Cheers
Feral Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tom Richardson
Sent: Thursday, February 15, 2001 5:06 PM
To: [EMAIL PROTECTED]
Subject: z20e again!
Hi list
It has spark, it has fuel but it will not go bang!
Pulled an injector out, cranked it, it sprays fuel (I saw and felt it)
Pulled a plug out, cranked it, it sparks (zac saw and felt it)
The timing is correct, we took the rocker cover off and checked that the
motor was on TDC- with both valves closed so it is on the intake stroke (and
has been all this time!). Firing order is 1,3,4,2 of course.
The only two things I could think of were fkd plugs, and lack of
backpressure? Only 12" of exhaust at present.
Any ideas guys?
Many thanks
- Tom
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
