ha! i KNEW it was that LRP. curse that poor attempt at fuel, banish it to
hell!!
----- Original Message -----
From: Richard Clough <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, March 03, 2001 9:24 PM
Subject: Re: LRP
> My daughter' misfiring Mazda Capella problem has been solved! I could
> hardly get the engine to start today after 3 days without driving it. When
> it finally did start with full choke and pumping the throttle, it was
> popping and spitting out the carby, as it has been doing for a couple of
> weeks. After fully stripping the carby and cleaning it (after previously
> fitting new leads, coils points etc), replacement of the plugs was the
last
> remaining option. The NGK plugs were only 6000Kms old which is why I
hadn't
> considered them. I fitted them when the motor was fully recoed.
>
> It seems the LRP not only soots up the plug threads but it also causes the
> plugs to prematurely die. When I (finally) replaced the plugs today with
> some second hand Motorcraft plugs I had rejected from my Datto 1600 auto,
> the engine no longer misfires when cold or feels weak. It now pulls like
the
> proverbial bull in spring time.
>
> So if you get symptoms resembling fuel starvation or a manifold leak when
> using LRP, try replacing the plugs (and the fuel).
>
> ----- Original Message -----
> From: "Errol Smith" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, 3 March 2001 0:32 AM
> Subject: RE: Tokico shocks, And D-I-Y Coil overs
>
>
> > Andrew,
> > The kits fit the most common struts,180B, 200B, 240K, C210, Stanza etc
> >
> > Cheers
> > Feral Errol
> > mailto:[EMAIL PROTECTED]
> > http://www.datrats.com.au/
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew
Greenbury
> > Sent: Friday, March 02, 2001 12:19 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: Tokico shocks, And D-I-Y Coil overs
> >
> >
> > Errol
> >
> > is your kit strut-specific, or the threaded sections fit over all the
> > usual struts?
> >
> > thanks
> > andrew
> >
> > > Guy,
> > > I sell adjustable platform kits to suit Koni 63mm ID spring sets. The
> kit
> > > includes the weld on threaded pipe sections, alloy spring mount base
> with
> > > lock nut and alloy spring top mount. Pricing is $255 + freight. They
are
> > > easy to fit. You remove your old spring platform using a lathe or a
> > grinder
> > > if you are careful. The sleeve is then welded onto the strut body at
the
> > > height you want so you are at the centre point of your adjustment on
the
> > > spring seat when the spring is loaded with the weight of the car.
> > > Cheers
> > > Feral Errol
> > > mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
> > > http://www.datrats.com.au/
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED]]On Behalf Of Guy Coble
> > > Sent: Thursday, March 01, 2001 9:28 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: Tokico shocks, And D-I-Y Coil overs
> > >
> > >
> > > Hi all,
> > > Does anyone know of an Australian supplier of tokico shocks?? Also
has
> > > anyone checked out Dave Turners website? http://www.daveturner.com He
> has
> > > D-I-Y kits to transform your standard macpherson strut to adjustable
> coil
> > > overs for $89.95ea US. Does anyone in aus do this sort of thing? I
> Imagine
> > > it would cost a hell of a lot more to get a machinist to do this sort
of
> > > setup for you.
> > >
> > > Thanks
> > > Guy
> > >
> > > --membersozdat-------------------------------------------------------
> > > OZDAT Mailing List Please Note:-
> > > Send (un)subscribe requests to [EMAIL PROTECTED]
> > > Send submissions to [EMAIL PROTECTED]
> > > No unauthorised redistribution of this email
> > > http://www.ozdat.com/ozdatonline/index.htm
> > > http://www.ozdat.com/ozdatonline/listindex.html
> > > http://www.mail-archive.com/[email protected]/
> > > ---------------------------------------------------------------------
> > >
> >
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
