Andrew i ran one of these dizzy's in my injected A series using a Wolf 3D
contact your nearest Wolf supplier, from memory you have to fit a small
resistor between the leads from the dizzy. Steve Newing from Speed
Technology might also be able to help.
-----Original Message-----
From: andrew smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, March 07, 2001 1:58 AM
Subject: fj20t dizzy
>A mate has just fitted an FJ20t into his 1200 coupe race car.It was one
>of my old motors that I had sold to a guy who ran it in a Bluebird
>sports sedan for a couple of seasons.I had set the dizzy up with a
>haltec chopper plate to alter the signal so it could be read by a haltec
>comp but the guy I sold it to run a fuel only 2d wolf so he binned the
>standard dizzy and ran a pulsar fixed dizzy.Can anyone help with how to
>wire this up so it will run with a 3d wolf.Is there anything else that
>he needs or any other suggestions.Thanks
>Andrew Smith
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
