andrew his no is 03-98735400    Mark.
-----Original Message-----
From: andrew smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, March 07, 2001 5:50 AM
Subject: Re: fj20t dizzy


>We tried the local wolf dealers but they dont like to give to much info
away
>but they'll do it for a fee.I tried to contact brett from formaz but
>apparently he's working in another workshop owned by formaz.Anyone know
where
>he is?Anyway looks like i'll have to do a bit of brain sucking research and
>figure it out.Have you got a contact number for steve.
>Andrew Smith
>
>M & J Pacey wrote:
>
>> Andrew i ran one of these dizzy's in my injected A series using a Wolf 3D
>> contact your nearest Wolf supplier, from memory you have to fit a small
>> resistor between the leads from the dizzy. Steve Newing from Speed
>> Technology might also be able to help.
>> -----Original Message-----
>> From: andrew smith <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Wednesday, March 07, 2001 1:58 AM
>> Subject: fj20t dizzy
>>
>> >A mate has just fitted an FJ20t into his 1200 coupe race car.It was one
>> >of my old motors that I had sold to a guy who ran it in a Bluebird
>> >sports sedan for a couple of seasons.I had set the dizzy up with a
>> >haltec chopper plate to alter the signal so it could be read by a haltec
>> >comp but the guy I sold it to run a fuel only 2d wolf so he binned the
>> >standard dizzy and ran a pulsar fixed dizzy.Can anyone help with how to
>> >wire this up so it will run with a 3d wolf.Is there anything else that
>> >he needs or any other suggestions.Thanks
>> >Andrew Smith
>> >
>>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to