ok
didn't realise
Heath
----- Original Message -----
From: "Andrew Denniss" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, 26 June 2001 6:00
Subject: Re: Stumpy skyline 5spd
> I have broken two boxes both where builder error the first time they used
the
> wrong size bearing on the front cluster and while under lots of load the
shaft
> moved to the side breaking the ends off third gear teeth. The second one
was worse
> when some other mob rebuilt the box they used a short nose input shaft so
it was
> only in around 2mm so when this sliped out of the spigot bush it dumped
all the
> teeth of the input and cluster :( I have since bought kev rowleys skyline
box with
> no problems at all must have been built bye someone who knows what they
where
> doing. 8-)
> Andrew
>
> MALDAT wrote:
>
> > If they break find out why..
> >
> > I think you might find the drive line is out of line.
> > Have you checked the line from the crank pully to the diff to see if the
gear
> > box is in line??.
> >
> > Malcolm
> > "the only weak link is the clutch"
> > Cleary Signs wrote:
> >
> > > CA18det in a 1200 coupe,
> > > Andrew has broken i think around 4 skyline gearboxes.
> > > 71C boxes are stronger
> > >
> > > Heath
> > >
> > > ----- Original Message -----
> > > From: "Richard Frank" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Monday, 4 June 2001 3:07
> > > Subject: Re: Stumpy skyline 5spd
> > >
> > > > which conversion would that be and what were you using the skyline
box for
> > > >
> > > >
> > > > into what car
> > > >
> > > > why dont you just use the skyline box
> > > >
> > > >
> > > > also can any one tellme the gear ratios of this box??
> > > >
> > > >
> > > > thanx
> > > >
> > > > leight
> > > > >From: "Cleary Signs" <[EMAIL PROTECTED]>
> > > > >Reply-To: [EMAIL PROTECTED]
> > > > >To: <[EMAIL PROTECTED]>
> > > > >Subject: Re: Stumpy skyline 5spd
> > > > >Date: Mon, 4 Jun 2001 10:45:54 +1000
> > > > >
> > > > >i'm in Brisbane and have 1 for sale @$250
> > > > >stumpy skyline that is (using the import box now in my conversion)
> > > > >
> > > > >Heath
> > > > >
> > > > >----- Original Message -----
> > > > >From: "Richard Frank" <[EMAIL PROTECTED]>
> > > > >To: <[EMAIL PROTECTED]>
> > > > >Sent: Monday, 4 June 2001 11:52
> > > > >Subject: Re: Stumpy skyline 5spd
> > > > >
> > > > >
> > > > > > how do you know which car car this box came out of - i need one
and i
> > > > >dunno
> > > > > > where to get it from ????
> > > > > >
> > > > > > also how do i recognise the r31 skyline??
> > > > > >
> > > > > > any one got any pics for both?
> > > > > >
> > > > > > thanx
> > > > > >
> > > > > > Leight
> > > > > >
> > > > > >
> > > > > > >From: Michael Cassidy <[EMAIL PROTECTED]>
> > > > > > >Reply-To: [EMAIL PROTECTED]
> > > > > > >To: [EMAIL PROTECTED]
> > > > > > >Subject: Stumpy skyline 5spd
> > > > > > >Date: Mon, 04 Jun 2001 06:46:49 +1000
> > > > > > >
> > > > > > > Can someone tell me the easies way to mod the g/box
xmember for
> > > a
> > > > > > >stumpy skyline 5spd? i seem to remember the x-member had to be
spaced
> > > > > > >about 20mm but do i need to reverse the xmember or slot the
g/box to
> > > > > > >mount bolt holes??
> > > > > > >
> > > > > > >thanx
> > > > > > >
> > > > > > >Michael
> > > > > >
> > > > > >
> > > >
>_________________________________________________________________________
> > > > > > Get Your Private, Free E-mail from MSN Hotmail at
> > > > >http://www.hotmail.com.
> > > > > >
> > > >
> > > >
_________________________________________________________________________
> > > > Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
> > > >
> > >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
