Hey andrew that HP output is quite impressive from a L20 turbo what kind of
boost and fuel where you using?? I will see how much the Ca18 will be making
next week at the datnet dyno day Im aiming around the 250hp mark before the
head comes off for some further work and some new valve guides ect.
Andrew
andrew smith wrote:
> Put the L20 turbo in a dyno comp yesterday.I won the 4 cyl turbo class
> and also got the highest hp per litre.The old dinasour made 228 hp
> before wheelspin set in which was at about 5500rpm only 200 rpm above
> the max torque figure.The mdx dynos stop the engine from reving futher
> while it measures torque and every time it would try to slow the motor
> over about 5500rpm it would just break loose cause the dyno graph to do
> loops.Anyway im gunna go back when they have more time to spare with
> bigger tyres and get them to strap the car down better and see what
> she'll do at around 6300 where i rekon it should make peak hp.They only
> put some straps on the front lower control arms.Then i'll run it up on a
> dynodynamics dyno and see what she'll do as about 25 of the cars there
> had run on these previously and recorded between 40 to 75hp more on the
> dynodynamics.
> Andrew Smith
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
