|
I don't think anyone on this list would ever doubt
the strength of an L Series engine :))
----- Original Message -----
Sent: Friday, October 19, 2001 4:34
PM
Subject: Re: datto spotting -
adelaide
Justin,
I certainly havent spent anywhere near $8000 on
mine but ive done all the work and fabrication myself.The L20 motor i got for
nothing and i just freshened it up.Balanced the crank,rods and pistons.Fitted
new rod bolts and flywheel bolts and a 280z flywheel and redrilled it to suit
a 240mm 3100lb clutch.It only has acl pistons with moly rings.An a87 head was
ported with 44mm inlet valves,new guides,seats and 110lb springs and thicker
lash pads to suit the turbo cam.A bit of deshrouding was done in the
combustion chambers.The whole thing was carefully checked and
assembled.Basically a stock bottom end.About $1000.plus $400 for the
clutch.The turbo was a t3 from my fj20 which i bolted to a home made
manifold.I fitted a carbon seal backing plate and bolted on a cd175 that was
sitting in the shed,modified the s2 dizzy,fitted a carter pump and a 3"
exhaust.I drove it for about a year like this then i modified the turbo
fitting t4 compressor and backing plate with a v trim wheel and back cut the
turbine wheel and fitted twin cd175's that i picked up for $15.I also use a
high pressure water injection setup that goes in after the turbo.On the dyno i
was running about 21psi but i sometimes run it as high as 30psi.This motor has
done over 50000 miles and has never had under 15psi put into it.I reckon the
whole setup,motor,clutch,turbo,fueling,exhaust and water probably owes me
around $3000. Yahoo!
Photos - Thumbnails View
Theres some photos of the motor there in the
qikdats album click on show all.
Andrew Smith
Justin Friedrichs wrote:
Andrew,
Thats interesting, a mate of
mine has a cortina with a late model 6
cyl ford motor standard, but
running a turbo, Thommo knows who it is. This
beast has around the 210KW
not sure if its FW or ATW, from memory and is
pulling
12.5's. I'm doing a sr20det 1600 with minor mods such as IC,
exhaust and air intake, and he reckons we'd be pretty close!! Hope so.
What turbs and what boost you
get the 228rwhp, very impressed!!!!
How much the donk worth?? The bloke
I talked to with the T3 estimated 8K.
Justin
> Justin,
> Pulling 12's in a 1600 with 210kw isnt as easy as
it sounds.Ive seen
> plenty of
> sr20det 1600's making about
this hp battling to get low 13's.While a mate
> of
> mine runs
13 flat out of his tori @ 97mph while similar times from a 1600
> the
> mph is up around 110.My L20 made 228rwhp @5500 before wheelspin set
in.It
> was
> during a competition and they didnt have time to
adjust the ramping speed
> to
> stop the spin and it was
enough hp to win the class.I rekon its good for
> plenty
>
more.
> Andrew Smith
>
> Justin Friedrichs wrote:
>
> > Yeah,
I reckon it looks great, something different, but wouldn't
> be
> > my colour of choice since its a trademark commo colour. Also I
reckon
> > certain colours match curvier cars like coomos or rx3's
ect.
> > The power
claims, well he was reluctant to go for a spin ( but
> we
>
> are having petrol restictions in SA). But the biggest thing was that he
> has
> > a Torana sitting next to it with a worked 308 and
he said the torry
> would
> > beat the datto!!!!! With
210KW I'd want to pull 12's !!!, you'd need a
> lot
> > of ponies to get a torry to go that quick.
>
> But seriously 210KW is
big power for a L20, especially with
> fairly
> > standard
brakes. VG30DET don't even have that much.
> >
> > >
Justin,
> > > How does a 1600 look in tiger mica.Why do you
doubt his power
> claims.From
> > > what
> >
> ive heard it goes pretty good.
> > > Andrew Smith
>
> >
> > >
> > > Justin Friedrichs wrote:
> > >
> > >
> I went to a blokes
house in Morphettville last night and he
> had
> > > a
> > > > schmik 1600, tiger mica colour (commo style). It has
a L20 with T3
> turbo
> > > > sucking through a 50mm
Weber. He reckons it had over 210KW at
> > > flywheel!!!,
> > > > doubtfull but it was nice. Apparently he went to
birdwood too. Only
> 17
> > > years
> > >
> old too!
> > >
> Anyone know him, Zac
possibly ????
> > > >
> > >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe
requests to [EMAIL PROTECTED]
Send submissions
to [EMAIL PROTECTED]
No unauthorised redistribution
of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
