I found out the specs from wade, it is a special grind, one of their customers owns the master, so they don't sell them.
.390" cam lift, .570" valve lift Duration: 256 degrees measured @.050" lift, 305 degrees measured @.009" lift Anyone know how this compares to the others like 74, 76 etc? Anyone got any figures for the Nismo cams? Cheers, Chris > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of > Richardson, Thomas Morgwn - RICTM002 > Sent: Tuesday, 18 December 2001 10:16 PM > To: '[EMAIL PROTECTED]' > Subject: RE: What cam is this? > > > Chris, > > Just try phoning Ivan Tighe or Wade, they can usually help > even if it's not > their cam. > > - Tom > > -----Original Message----- > From: Chris Howard [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, 18 December 2001 3:59 PM > To: [EMAIL PROTECTED] > Subject: RE: What cam is this? > > > So nobody knows what my 640A cam is then??? > > Cheers, > > Chris > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of > Steve Lamb > > Sent: Tuesday, 18 December 2001 12:23 AM > > To: [EMAIL PROTECTED] > > Subject: Re: What cam is this? > > > > > > >hey chris, im after a cam identification too. the came > that i picked > > >up in that swoit deal has a 663 stamped on it. i think it may > > >possibly be a datrally one? > > >anyone know? > > > > Yes that's a Datrally cam. > > > > 663 is also known as a 72 deg cam in Wade terminology - 288 > deg total > > duration, .335" lobe lift. > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
