That should have been .585" valve lift as the L series rocker ratio is 1.5:1 correct??
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]] On Behalf Of > Chris Howard > Sent: Wednesday, 19 December 2001 11:57 AM > To: [EMAIL PROTECTED] > Subject: RE: What cam is this? > > > I found out the specs from wade, it is a special grind, one of their > customers owns the master, so they don't sell them. > > .390" cam lift, .570" valve lift > Duration: 256 degrees measured @.050" lift, 305 degrees > measured @.009" > lift > > Anyone know how this compares to the others like 74, 76 etc? > Anyone got > any figures for the Nismo cams? > > Cheers, > > Chris > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]] On Behalf Of > > Richardson, Thomas Morgwn - RICTM002 > > Sent: Tuesday, 18 December 2001 10:16 PM > > To: '[EMAIL PROTECTED]' > > Subject: RE: What cam is this? > > > > > > Chris, > > > > Just try phoning Ivan Tighe or Wade, they can usually help > > even if it's not > > their cam. > > > > - Tom > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
