I think using side draft mani with EFI system would be much better,than the factory EFI as its really only L16,and a strech to L18 ,as soon as you talk more Hp forget it. Scott has been driving a 180SX (S110) latelly with L18E and he reckons its better than twin SU's on a L18.Better response.
Malcolm Chris Simpson wrote: > Surely if your going to go to that trouble to cut and shut stuff, you might > as well start with any 4 cyl L-series manifold, match port it to your > head,and then use some tubing to your own plenum. Then you can make it as > big as you like and use a throttle body of something larger probably 60mm > or so. > > Also custom intake and plenums look so cool!! > > Richardson, Thomas Morgwn - RICTM002 writes: > > > A cheaper option is to cut'n'shut a L24E R30 Skyline manifold (easier to find) > > > > -----Original Message----- > > From: David Thompson [mailto:[EMAIL PROTECTED]] > > Sent: Friday, 18 January 2002 12:29 PM > > To: [EMAIL PROTECTED] > > Subject: Re: L series EFI > > > > > > its too small. > > I have just made up a custom efi manifold because of this. > > the inlet runners are too small diameter and the plenum is too small for > > naturally aspirated engine. > > I was working on cutting and shutting a 280zx efi manifold because of the > > bigger diameter runners, however the plenum is still too small. > > > > > > > > >From: "Chris Williams" <[EMAIL PROTECTED]> > > >Reply-To: [EMAIL PROTECTED] > > >To: <[EMAIL PROTECTED]> > > >Subject: Re: L series EFI > > >Date: Fri, 18 Jan 2002 12:15:56 +1100 (EST) > > >MIME-Version: 1.0 > > >Received: from [209.61.188.254] by hotmail.com (3.2) with ESMTP id > > >MHotMailBE10C3200009400431A1D13DBCFE0EF20; Thu, 17 Jan 2002 17:19:48 -0800 > > >Received: from mars (CPE-144-136-12-205.vic.bigpond.net.au > > >[144.136.12.205])by jupiter.linuxengine.net (8.11.6/8.11.0) with ESMTP id > > >g0I1HBx23865;Thu, 17 Jan 2002 19:17:12 -0600 > > >From [EMAIL PROTECTED] Thu, 17 Jan 2002 17:20:02 -0800 > > >Message-ID: <[EMAIL PROTECTED]> > > >In-Reply-To: <[EMAIL PROTECTED]> > > >References: <[EMAIL PROTECTED]> > > >X-Priority: 3 > > >Importance: Normal > > >X-MSMail-Priority: Normal > > >X-Mailer: SquirrelMail (version 1.2.1) > > >X-Envelope-To: membersozdat > > >X-UIDL: 0$"!!HpB"!AH@"!a1J"! > > >Sender: [EMAIL PROTECTED] > > > > > >Is that what I need or is that too small for a worked 2L? > > > > there is an l18 efi manifold at Grand Auto wreckers, lonsdale SA. > > > > > > > > > > > >>From: "George Zouglakis" <[EMAIL PROTECTED]> > > > >>Reply-To: [EMAIL PROTECTED] > > > >>To: <[EMAIL PROTECTED]> > > > >>Subject: Re: L series EFI > > > >>Date: Fri, 18 Jan 2002 11:24:03 +1100 > > > >>MIME-Version: 1.0 > > > >>Received: from [209.61.188.254] by hotmail.com (3.2) with ESMTP id > > > >>MHotMailBE10B68600914136E819D13DBCFE0A650; Thu, 17 Jan 2002 16:25:56 > > > >>-0800 Received: from mars (CPE-144-136-12-205.vic.bigpond.net.au > > > >>[144.136.12.205])by jupiter.linuxengine.net (8.11.6/8.11.0) with ESMTP > > > >>id g0I0NQx21011;Thu, 17 Jan 2002 18:23:26 -0600 > > > >>From [EMAIL PROTECTED] Thu, 17 Jan 2002 16:26:40 -0800 > > > >>Message-ID: <008001c19fb6$c901fee0$4900a8c0@GeorgePC> > > > >>References: > > > >><[EMAIL PROTECTED]> > > > >>Organization: Advanced Engine Management > > > >>X-Priority: 3 > > > >>X-MSMail-Priority: Normal > > > >>X-Mailer: Microsoft Outlook Express 5.00.2314.1300 > > > >>X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 > > > >>X-Envelope-To: membersozdat > > > >>X-UIDL: )~l"!oUJ"!KJj!!H3[!! > > > >>Sender: [EMAIL PROTECTED] > > > >> > > > >>Hey Chris, > > > >> I was in your shoes about 2 years ago when I wanted to EFI > > > >> my > > > >>L16. > > > >>Anyway it took me about 6 months to find a manifold....mind you, once I > > > >>got onto the Ozdat mailing list it took 2 weeks....meaning that you've > > > >>come to the right place! Anyway, I found a complete manifold with > > > >>everything still intact for $150. You'll need to use a larger throttle > > > >>body (VL Commodore I think), series II B-Bird dizzy (for running a > > > >>computer), high pressure fuel pump, anti-surge tank with primer pump, > > > >>gaskets, high pressure fuel line and > > > >>fuel filter, ECU, 2 new holes in the head to accommodate the factory > > > >>manifold, linkages...and tuning. That's most of what I did and all of > > > >>it minus the ECU cost around $500 to $700 mainly because I took my time > > > >>in finding bargain bits and pieces. It's a big job.....I should have > > > >>put in a high tech engine instead but I learnt a lot out of the whole > > > >>experience. Regards, > > > >> George > > > >> > > > >>----- Original Message ----- > > > >>From: Chris Williams <[EMAIL PROTECTED]> > > > >>To: <[EMAIL PROTECTED]> > > > >>Sent: Thursday, January 17, 2002 3:10 PM > > > >>Subject: L series EFI > > > >> > > > >> > > > >> > Hi all, > > > >> > > > > >> > I am getting an L20B built at the moment 1.5mm over bore flattops, > > > >>oversize > > > >> > inlet valves, crow cam etc... but only have the 32/36 for it at the > > > >>moment > > > >> > and since twin 45's will cost any where between $300-$500 I thought > > > >> > It would be better to put up with the smaller weber and save up and > > > >> > get EFI > > > >>as > > > >> > I would get more power and fuel economy that way and it would make > > > >> > it easyer to turbo later too. > > > >> > > > > >> > What are my options ? > > > >> > > > > >> > Regards > > > >> > > > > >> > Chris W > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > > > Chat with friends online, try MSN Messenger: http://messenger.msn.com > > > > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > Chat with friends online, try MSN Messenger: http://messenger.msn.com > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
