|
Naah,
Easy as.. Go to an exhaust shop and ask for a 40mm *offcut* and then ask them to
flare it to 50mm at one end. Nissan would want $200 for something like that.
Exhaust shop $10. Then attach it with rubber joiner hoses and large hose
clamps.
I'm in brisbane
but the problem is it's a step down
hose
it's 50mm internal diameter where it goes on the
compressor outlet, then it needs to step down to 40mm internal/50 external for
where the intake pipe clamps on
I'm thinking it's a part that may have to be
ordered from Nissan ... $$$ :(
Dave
----- Original Message -----
Sent: Sunday, January 20, 2002 4:42
PM
Subject: RE: turbo intake seal
problem
In
Sydney, You can get straight lengths of dunlop hose in most sizes from
Graham's Rubber in Granville. It's about $40 a metre and sold in metre
lengths.
I
might have a bit left if you only need a few inches, what inside diameter do
you need?
the piece of rubber that goes around the
compressor outlet on the turbo then the intake piping clamps onto on my
Z18 has deteriorated over time and now has a huge split in it, as such I'm
only holding 4psi tops
where can I get a replacement rubber bit for
this, I was going to just try some radiator house or something, but after
removal and inspection of old piece, it appears to be a different diametre
at either end, so I'm assuming you need a special piece?
Thanks again
Dave
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
