|
hmmmmm. i never thought about
that.......................
mark k..
----- Original Message -----
Sent: Monday, January 21, 2002 7:20
AM
Subject: RE: turbo intake seal
problem
Naah, Easy as.. Go to an exhaust shop and ask for a 40mm *offcut* and
then ask them to flare it to 50mm at one end. Nissan would want $200 for
something like that. Exhaust shop $10. Then attach it with rubber joiner hoses
and large hose clamps.
I'm in brisbane
but the problem is it's a step down
hose
it's 50mm internal diameter where it goes on
the compressor outlet, then it needs to step down to 40mm internal/50
external for where the intake pipe clamps on
I'm thinking it's a part that may have to be
ordered from Nissan ... $$$ :(
Dave
----- Original Message -----
Sent: Sunday, January 20, 2002 4:42
PM
Subject: RE: turbo intake seal
problem
In Sydney, You can get straight lengths of dunlop hose in most
sizes from Graham's Rubber in Granville. It's about $40 a metre and sold
in metre lengths.
I might have a bit left if you only need a few inches, what inside
diameter do you need?
the piece of rubber that goes around the
compressor outlet on the turbo then the intake piping clamps onto on my
Z18 has deteriorated over time and now has a huge split in it, as such
I'm only holding 4psi tops
where can I get a replacement rubber bit
for this, I was going to just try some radiator house or something, but
after removal and inspection of old piece, it appears to be a different
diametre at either end, so I'm assuming you need a special
piece?
Thanks again
Dave
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of
this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
